Everything posted by BannedHost
-
Basic led headlights signal bulb replacement
You don't have space to remove the bulb without removing the whole headlight. I allready tried everything and the only solution was to remove the whole headlight...
-
Basic led headlights signal bulb replacement
-
Basic led headlights signal bulb replacement
Hello. The caps need to be cut to get to the bulbs.
-
Crnering lights coding
I have coded the cornering lights, changed the signals bulb with LED's. My car has 4000 km, I went to the dealership and they said that it does not affect the warranty as long as there is that module on the car and there is no physical modification. They have no way of knowing if the car had cornering lights or not. They don't check for that.
-
Basic led headlights signal bulb replacement
Thanks a lot! The information in the service manual is a little wrong. The bulb socket must be rotated 45 degrees counterclockwise and then it can be removed with ease. I had to dismantle the inner fender mudguard only in the front part so that I could detach the bumper from the side clamps (I didn't take it off completely), only to have some space to detach the headlight and then I realized how it was the mechanism. Before I kept pulling the socket as the manual says without success.
-
Basic led headlights signal bulb replacement
I got the rubber caps for the headlight turn signal, after that I cut the cap and finally I see the light bulb.. But the space there is extremelly narrow and you cannot put more than one finger in there. I've failed to get out the bulb.... it has a strange socket. To be continued.....
-
Basic led headlights signal bulb replacement
Hello everybody! I wish to change the headlights signal bulb on my mk4 with LED. Except that the socket to change the bulb is molded from the factory. In this case, how can you change the halogen bulb if it burns out or if you want to replace it with LED one. I should cut or drill the headlight. It is a shame for Skoda to make such a headlight. Without access to the light bulb, but not even to put the LED on if there is no access Any tips?
-
Crnering lights coding
I found this info. On my car it worked. I have basic led headlights. Cornering lights via fog lights activation: 09 - Adaptation - leuchte 12 NL L B45 - lichtfunction B 12 - abbiegelicht links 09 - Adaptation - leuchte 13 NL R B5 - lichtfunction B 13 - abbiegelicht rechts 09 - Adaptation - leuchte 16 BLK SL - lichtfunction B 16 - abbiegelicht links 09 - Adaptation - leuchte 17 BLK SR - lichtfunction B 17 - abbiegelicht rechts 09 - Adaptation - LWRKonfiguration - Static AFS light - ECE R119