Luccie_007

Wll i noticed you should also do the input EQ, as the MIB ****s that up. So set your settings to Front Audio focus in MIB, These were my files during holiday, meaning NO SUB, as it had to be removed due to space problems But i do have this -6dB filter installed on the tweeter, so i wonder of that works for you. GLADEN HG-CR-ONE These are made with an UMIK1 as i bought a second hand one, its sounds more clear than my Auddyssey microphone i used before from my Denon receiver. 5 sub FR RE.afpx 5 no sub FR RE.afpx 5 no sub.afpx

The center is not connected in my skoda, there is no speaker there

I have bought this loom for my superb 2023. But seems to be for all Vag group. PP-MQS 1.4 Match Adapter für Mercedes, Volkswagen 1 Meter Bought from ars24 Biggest improvement next to match amplifier and subwoofer was using a new filter for the tweeter and woofer. I bought this set and cut both wires to get -3db on tweeter range. GLADEN HG-CR-ONE Also fittedy sub in the PHEV hybrid bin. Just a small cut and it fits perfectly I am wiring the high power mode wire. But i have the mode enabled now for 3 months and no issues seen. On the videos of Ars he does say it is not needed due to thick cables being used by vag. So ses unnecessary, also I can't measure a real voltage drop on big bass tunes.

Only got a few minutes, but my experience so far: The sub makes the difference, giving the door speakers room to breathe for low-mid range. Things i did: - Used my Audyssey microphone that comes with many cinema receivers and laptop (disabling al input processing) to tune the EQ with TuneEQ -> and for Timing - Got a lot of improvement when i dit the input equalizer, MIB unit messes with the EQ itself a lot. - Mayor improvement setting the MIB unit to front speakers and routing the Front Inputs to the rear speakers, the MIB unit does something strange with the rear speakers signal which cannot be compensated for. (Found this on a skoda forum, tried it and was really happy with it - Use the WAV files that come with the software to tune the right things. Right Order: -> Timing -> Input EQ (Disable outputs in software for a quite time ) -> Route front signal to rears (Virtual chanel processing) -> Output TuneEQ Was quite happy but still the tweeter was killing me. Could not damp it enough in the match to my liking. So i had some spare crossovers which have -3db setting on the tweeter, installed this and redid TuneEQ and was much more satisfied. Have now bought som Gladen CL-ONE crossovers because the ones i had are to big to fit, still have to mount these and test. -> Bought an Remote to controle SUB and switch between 2 profiles images: INputs signal readback before filtering (can be done without microphone) All range -> without -3db crossover left filtered -> test crossover on left tweeter.

Anyone got the file? I'm receiving it this week, for my Superb, would be a good start.