LinoTheFox

Hm i see, so its needing of dealership or a specialist. I will see what the mechanic will say tomorrow

It's not that I don't believe; I don't understand. What is this TPI? How can an update to the firmware fix something like this? Well anyway, I am going tomorrow to drop my car at the mechanic for replacing the DCC shocks, will let him know about the firmware update and see how it goes. if there is something I should note to him, do tell me

i think mine has something making the gears consumption spike and cutting the power, i will try to lube them with grease today, move the backrest back and fourth to see if it will losen and try to do the norming again

maybe something got stuck in his gears and making the power spike and shutting down the motor thaus the error i get on the backrest and not finishing the calibration

Another update, the backrest does respond to the calibration, but at some point when it is going towards the steering wheel, its stopping, then i get the error, but it does respond and trying to do it so the motor is ok and such. Maybe something stuck in his gear? Or something similar? @Cairus what do you think?

here is also a picture of the adv measuring

i dont think so, maybe its best to go the to dealer for it?

And can i do it alone?

here is the error codes i found, also checked in adv mesures, all the other norming position are adujsted and only this is not "standarnized" the motor on Backrest manual works fine and when i try to do norming only on this backrest it is trying i hear the motor for a moment and then stopping and give me "aborted due to malfaction" Address 36: Seat Mem. Drvr Labels: NONE Control Module Part Number: 5Q0 959 760 A HW: 5Q0 959 760 A Component and/or Version: Sitzmemory H06 0009 Software Coding: 001000000000000001A081808080000000008181000000F4 Work Shop Code: WSC 00000 000 00000 ASAM Dataset: EV_SeatMemorDriveSide 001015 (SK48) ROD: EV_SeatMemorDriveSide_001.rod VCID: 3B7582EBB265A943D5-806E 8 Faults Found: 9655810 - Motor for Seat Backrest Adjustment B1356 02 [00001001] - Signal Failure Confirmed - Tested Since Memory Clear Freeze Frame: Fault Priority: 4 Fault Frequency: 8 Reset counter: 51 Mileage: 204208 km Date: 2025.11.11 Time: 20:35:13 9655636 - Motor for Seat Fore/Aft Adjustment B1355 54 [00001000] - Missing Calibration / Basic Setting Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Priority: 4 Fault Frequency: 2 Reset counter: 92 Mileage: 204208 km Date: 2025.11.11 Time: 21:02:45 9655892 - Motor for Seat Backrest Adjustment B1356 54 [00001001] - Missing Calibration / Basic Setting Confirmed - Tested Since Memory Clear Freeze Frame: Fault Priority: 4 Fault Frequency: 1 Reset counter: 51 Mileage: 204208 km Date: 2025.11.11 Time: 20:35:13 9655380 - Motor for seat height adjustment B1354 54 [00001000] - Missing Calibration / Basic Setting Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Priority: 4 Fault Frequency: 2 Reset counter: 92 Mileage: 204208 km Date: 2025.11.11 Time: 21:02:45 9655124 - Motor for Seat Tilt Adjustment B1353 54 [00001000] - Missing Calibration / Basic Setting Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Priority: 4 Fault Frequency: 2 Reset counter: 92 Mileage: 204208 km Date: 2025.11.11 Time: 21:02:45

I can only do it tomorrow tho

It got only got to default settings and with VCDS i did return it to default settings The automatic calibration worked also but still no chime or letting me save position

superb style 3 seat memory model drivers my seat memory has been wiped (lets not get why it happened) me and my GF want to put our seat memories into the model, but it wont do anything. on the multimedia when going to car setting -> seats I have the store memory in key (which is turned off and CANT be turned on, probably because of the model doesn't have anything stored yet.) I have followed the manual calibration doing the front up down back stuff, see video https://www.youtube.com/shorts/1ixkHTsE8SA I don't get the chime I suppose to get, I once had this also when I got my car and it did have the chime and we stored our positions and everything was ok. Am I messing up something in the calibration? it does feel like I miss something because I had the same feeling when I did first time unit I got it and forgot.

thanks you so much :)

2016 superb style 2.0 engine ea888 my DRL on the driver side died. the white stripe doesnt turn anymore and to top that the whole system is yellow and not white like it should be because of aging. i have seen not once this on aliexpress that offer the board to replace it the item is around 50$ but buying new headlight is 1400$ here did someone replace it and can say if its taking the headlight out and just replacing the board, or dissasmble the whole headlight just for this small repair is there even a guide maybe here?? thanks!

well vcds doesnt have for my superb the bleeding function :\