Taztoza

It is gone. the mileage minimum was set from 30.000 to 15.000 and after restart car all errors were gone. Also changed the oil but the oil stayed at poor oil so I changed that one to good.

Yes but I want to know the exact changes I have to make. Don't want to guess and then guess.

THX i found the same at VCDS forum. I have learned in the new battery and now the battery is charging from 42 tot 75% yesterday a short drive of 10 km. Today i will test it. I hope the sensors get enough energy not to go crazy.

I would prefer seat Ateca 2019 1.5tsi. But that will be the same as the Skoda I think.

I have learned the new battery in. It was only 42% charged. Now it is charging and I think some errors will disappear when driving through the gate and triggering the side sensors and then triggering the fail safe of 3000rpm. I bet that one is going to dissappear. But I did the choding from CAN gateway. I couldn't get in 61 battery. I will let you know if the errors get solved.

What are your mapped values? Because on some other topics that was the solution. That is why I want a mapped 17.

Yes, I have cleaned them and checked them. They work properly.

I never learned in the new battery. I will try to find the specifics of the battery because the battery that is now is is a more heavy battery than there was before. I did not change any code that I did not set back yet.

3 months ago. 8.000km

I tried to clear the error with odb eleven and vcds but without success. When trying to clear it the road sign pop up comes and tells me that road sign can not recognise road signs properly. I have not tried basic settings yet because I don't know what to set and what it will do.

Hi All, I have an error i just dont know how to get rid of it. The error shows when i scan with ODB eleven or with VCDS. I want to compare the results of people who can mapp this module so i can see where my differences are.

21 works https://mibsolution.one/#/1/9/MHI2%20-%20HARMAN/Gracenote

I will try the v23 and see what happens

Only thing that did not work is Gracenote.. I don't know which database i can use. So i left it empty and got an erro 134 during install. The fec codes work now and i have updatet to 450. I renamed the patch folder to MHI2_ER_SEG11_P4709_1_MU1447_PATCH to make it work under MIB because the AIO 1447 renames the firmware to MHI2_ER_SEG11_P4709_1 and MIB looks for a patch folder with the same name as the running firmware of the device.

I simply can't get the FEC codes in. Added them to the feclist on the sd card but when i list them up with the head unit they don't show up YESSS Ionly had to restart the head unit. Somehow they are loaded from .... something to something at startup and don't change untill next startup

So i bought some VCDS and have read the unit code . I know how to update it with VCDS. So I will update from MHI2_ER_SEG11_P4708 1409 to MHI2_ER_SEG11_P4709 1447

Thx, I see i have an old firmware. Updating that is no porblem but getting the errors after that fixed is. Too much risk for me i think. to fix "B201A - Checking SVM" fault after update

I have a Seat Ateca from which refuses to load the newest upodate. Is there a manual how to MIB this thing to work with it? A dummy proof manual

Exfat does not work fine in Seat Ateca. Only Fat works 100%

THX