cmoi

Yes it is a bit messy, I found my spare parts at volkswagen because at skoda, he had only the other reference in stock !

A brief return on the leak, After straightening the fixing legs of the injection ramp, I put with screws in class 10.9 and seal and cups were changed by original parts (80 euros for 4 kits☹️). I erased the error with OBD11 and everything works perfectly. For information, there are 2 types of injectors for our 1.2 tsi 110, so it is essential to take original kits.

I do. I bought the car,new and I do EVERYTHING on it (except tyre change), myself.👍

Ok, this bended common rail isn t normal!lol I persist in saying that the rail was like this in origin, all twisted. It is impossible to that the common rail be deform himself, alone because it took me a clamping vice and a clamp to straighten the rail...

I test the common rail this afternoon and try to put the paw straight...

You're probably right. In my picture, the right-hand side is the screw was loosened. So after, it is the bottom screw that took up all the efforts and the injection cups. This twisted the paw of the common rail until it forces too much on the screw and breaks it. I'm surprised that the thread in the cylinder head is always good.

Ohh, I reassure you, in France, it's the same ****... I find this on my common rail, not sure it is good and perhaps it explain the problem... the curve part is here where the bolt broke... Tomorrow, i check on the cylinder head if it is normal.

Hello, I m a french man, sorry for my english !, and i have the same issue with my wife's car ! The model is a fabia MK3 , 05/2017 (purchase new), with 170000km. this weekend, the problem appear, like many of you, with smell and petrol leak : I took it apart to access the injection and found the same problems: 1 broken bolt , at the end of the common rail, 1 bolt unscrewed and 1 broken seal... It is strange because i have a leon 1.4 tsi 140, year : 2013, and after 11 years and 250000 km, there is no problem with the common rail (no broken or unscrewed bolt !)... I think it's due to a problem with the tightening of the common rail, done at the factory, right?

Hi Guys, Sorry for my bad english ! I m cmoi, I m french and i have a Skoda fabia 1.2 tsi 110 hp , year : 2017. (this is my wife's car) buy new and stock ! The car have 170000 km and It runs perfectly ...until now...lol but It is a good car . cmoi