RTM

Hi, i checked the drivers door wiring harness and there are no damaged cables. Checked again with VCDS and all doors are signalling correct when are open, closed, locked and unlocked. Strange finding: In VCDS there are several ID-sensor (1,2,3 and 4) authentication statuses, but i have information only on number 2. Is this normal? Here is what we monitor when i get out of the car and close the door. In the car Out of the car 1 second later What i can monitor to see which actuator is wrong. Or how to read the trigger information? What triggered the lock? In the last screen the trigger code is 01 and i do not know what is this?

Hi all, i have issue with missing sound from the big speakers in the rear door since i bout the car. I check the wires from the hub and all is OK. The speakers are good, but no sound on both sides. The small speakers have audio output. I have the sound system version with amp. In the front doors all is OK. I check the settings in the amunsend+ media, but all is good there also. Any ideas?

Hey i have exactly the same problem (it started like that) now every time i get out of the car it locks itself... it`s crazy. I rebuild some broken cables in the drivers door before two months. Today i rebuild 3 broken wires on the passenger side, but this didn`t fix the issue. i checked the rear right door. Tomorrow i need to check again the drivers door and the rear left for cable problems. Still... i check with vcds and all doors have normal status open-close and locked-unlocked. Do not know what else to check if the door cables are ok.

So the problem is the dome button itself. It was burned hard, but i do not know what is the reason. It was heated so much that the solder was loosen and the metal contact plate was fallen till a position where it didn't make contact with the middle position of the switch. So i clear the plate and solder it back and it started to work. [img]

There are no fault codes.

I guess the button itself is the problem. VCDS is measuring 0 for interior lights with closed door, when i open the door it goes to 99,6, but nothing happens. [img]

So i pulled out the wire harness from the door and checked deeply all cables 15 centimetres before the connector. The fuses are checked, there was one for the car cigarette lighter and was changed. Didn`t blow again. I guess i`ll need to find the live channels. Also wire schematics for the door will be good so i can check all cables from the connector to the end with the Multimeter. If someone has idea where i can find wire schematics?

Hello dear Skoda community! So i get this Superb II estate TDI 2012 and i start fixing some issues. I left with two problems that i struggle to find the root. It wont unlock from the inside button on the door and the interior light doesn't turn on when i open the door. The door is detected when is opened, the lights in the foot area are on, but the once on the ceiling, doesn't come on. They are working because when i turn them on from the button all are OK. And yes, i try all three positions of the switch. Found two damaged cables that are connecting the door and fixed them (Purple with yellow and brown with green). Checked all other cables and isolated those with the damaged rubber. Nothing has changed :( So i suspect damaged comfort module or something wrong with the coding. I need guidance where and what to check in the Central Electric menu to verify that the settings are correct for the interior lights and for the unlocking maybe. By the way, there are no errors codes in VCDS.