dec76

Hi Andysuew, I live in Brisbane and also ACC and lane assist. my car, if it can see the road markings, allows auto steer below 65 with Traffic jam assist on. the lane assist lights up green and stays illuminated even when the vehicle is stationary past 3 seconds. when i pull the stalk or touch the throttle the car takes off and steers until 10-12 kmh or 10 secs whichever comes first thanks Heath

Hex can works with my 2016 built S3 without issues and all modules are accessible. Heath

The Compass moves to the bottom left of the MFD and i can access the menu on the Columbus HU. It just keeps coming up no road sign data available for area. Could it be that the TSR is only available in Europe/UK and the system recognizes that i have Aussie maps installed????

Yes i do have it on the left hand side of nav screen ordinarily, but when TSR is coded it obviously disappears. Been for a drive of about 30 KM on normal roads, motorways and expressways, but nothing

Hello All, Im in Australia with a 2016 built (jan) Superb 3 190TDI Combi. I have coded everything that is possible, but cannot get the Traffic Sign Recognition (TSR) to Work. It codes everything properly but then states that no data is available on the MFD Can anyone on this forum tell me if i missed something, or even better, if anyone is Australia has succeeded get this done, even if on a Octavia 3 would be helpful. Just thinking that it may be a regional thing with mapping data or something GIZMO68, can you shed any light?? Thanks Heath

this only happens in mine if I have used the rear wiper the last time I started the car. without fail, the wiper then sweeps and parks on the next key turn. only when i have used it previously does it do this.Maybe it is some kind of re-paring of the blade?? Heath

Hi mate Its three years with 45KM on ODO Ta

Hi Chrispy B and Superb170. I have had this same issue! I had P7's on since purchase got 40Km out of set. Noise was still there with new tyres (same P7). went to dealer and they replaced both front wheel bearings and noise now gone. Maybe check this as it fixed my noise and my Combi is now super silent. Cheers Heath

it is the traffic program for the RDS on radio. it doesnt work in Oz therefore warning you it is inactive. you will have a small TP in the top right of the screen when radio is on. Heath

Skoda Superb Elegance Estate 170 TDi DSG over 514km at 100-110km/h read a brim to brim of 4.9L/100km. This was done in 25 degree centigrade over the last weekend. The MFD stated 4.7L/100km. Hope this helps.

has anyone had a look closely at the rear pics in this spyshot link? The badges read "BT" which could mean use of the new VAG twin turbo 2.0CR and the other badge is "CROSS". This could be a model somewhere between the 4x4 models and a scout with model performance to boot? hope it has this engine as i want more power, even after a flash tune. Heath

Looks like a Photoshop! the LED DRL's don't look quite right to my eye's I happy to eat my words though if i can get a set!!!!!! Heath

Hi Tiwi, I have a Combi with Pirelli P7's factory fir and they have none of this issue. I have driven it to cairns and back from Brisbane a couple of times and have now 22500 on clock and they are still more than a half left on tread. Is the issue on the outside only?if so,you may have a toe out/in issue which from previous VW products i have owned, had caused problems. The issue could be as Ken has stated, Dunlop aren't that good! Heath

Hi GT below link may help you as this show you the way to change it. This is for the new 9W7 bluetooth kit. http://www.youtube.com/watch?feature=player_embedded&v=OTVnlhZLM3k Heath

Using the MFD, go to phone then to settings, you can from there scroll to the options and change the phonebook from Lastt, first to First Last. hope this helps Heath

I think that these are the DRL's on the Yeti. there will be a setting in the cluster to turn on or off! Heath