Jump to content

Jabbasport

Members
  • Posts

    1,330
  • Joined

  • Last visited

Posts posted by Jabbasport

  1. I've just fitted this kit into a Seat Leon with RNS510 which i think is the same as Bolero?

     

    Bluetooth audio works fine, but there's no track info displayed and cant change track with the wheel.

     

    I think this is a coding issue though and for whatever reason can't currently connect to the telephone module to code it so have sent off a message to carsystems.

     

    I'll let you know how i get on.

  2. I realised this once i'd replied.

     

    For some reason it wasn't showing the latest enquiries at the top!

     

    Time to get my forum arse in gear.

     

    The Summer has been busy with loads of work so unfortunately our on-line presence has dropped :(

  3. PolarFIS_Adv.jpg

    Polar FIS+ Advanced, What is it ?

    Advanced Polar FIS is the evolution of FIS + unit. It adds new parameters in addition to new features.
    Polar FIS + enabled viewing vehicle parameters in the FIS screen, but Polar FIS Advanced, as well as incorporating more parameters, includes new features like the ability to modify the number of flashes of intermittent comfort indicators, function automatic lowering of the mirror on the passenger side when engaging reverse and some functions which are can only be activated with Diagnostic cable such as VCDS.

    Parameters Available:

    • Real Speed extracted from ECU motor
    • External Temperature
    • RPM Engine
    • Battery Voltage
    • Petrol Tank Litres
    • Calculated Oil Temperature
    • Measured Oil Temperature
    • Engine Ambient Temperature
    • Intake Air Temperature
    • Cooler Temperature
    • Engine Coolant Output Temperature
    • Radiator Coolant Output Temperature
    • Fuel Temperature
    • Request Boost Presure
    • Measured Boost Pressure
    • Atmospheric Pressure
    • Intake Manifold Absolute Pressure
    • Required Fuel Pump Pressure
    • Measured Fuel Pump Pressure
    • Fuel Rail Pressure
    • Brake Pedal Pressure
    • Brake Pump Pressure
    • Calculated Engine Load
    • Measured Engine Load
    • Mass Air Flow
    • Mass Air Flow
    • Accelerator Pedal Position
    • Throttle Valve Position
    • Engine Torque
    • Engine Power (HP)
    • Oil Level
    • Oil Minimun Level
    • Injection Timing
    • Ignition Angle
    • Misfire Sum
    • Misfire Cylinder 1-12
    • Misfire Cylinder 1-12
    • Angle Delay Cylinder 1-12
    • Exhaust Temperature
    • Catalyst Input Temperature
    • AIR/FUEL Ratio (LAMBDA 1)
    • Fuel Trim Bank 1/3
    • Fuel Trim Bank 2/4
    • N75 Duty Cycle Specified
    • N75 Duty Cycle Actual
    • Injection Quantity
    • Injection Start
    • Injection Duration
    • Injection Start Quantity
    • Injection Quantity 1-12
    • EGR Duty Cycle, EGR 1
    • EGR Duty Cycle, EGR 2
    • Charge Pressure Control Specified
    • Charge Pressure Control Actual
    • Before Turbo Temperature
    • DPF Temperature, DPF 1
    • DPF Temperature, DPF 2
    • DPF Oil Ash Volume, DPF 1
    • DPF Oil Ash Volume, DPF 2
    • Percentage DPF Filling
    • DPF Regeneration Counter
    • DPF Input Temperature
    • DPF Output Temperature
    • G Lateral Force


    These also allow fitment of the latest VW Bluetooth units, designed for white dot displays to vehicles fitted with red dot displays.

    Firmware updatable, with constant updates with more and more features.

    Complete plug and play, not messing around.

    Demo videos - Official JabbaSport Video to folow:




    £240 delivered anywhere in the UK.
  4. Get them to fit a stealth roll cage one that follows the contours of the vehicle so can't be seen from the outside

    keeping the q car look. Mandrell bent tube painted black should be hard to see. I wouldn't go driving to the

    'exiting' level without this fitted especially having flipped a clio onto its roof. Safety first!!!

    Luke has the cage all planned out, looking at what he is going to do I think it will really blend in nicely.

    We have invested in a nice bit of machinery for tube bending mainly because of the racing and building race cars. But it now gives us the ability to perform this kind of work 'in house' much better for controlling the final finished product! Shame the welder broke today though! :think: new one purchased don't want to hold the project up! :happy:

    Brian.

    • Like 1
×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.