zore89

Ses you can find led and tube on aliexpress i will try this and also they have lens: https://a.aliexpress.com/_EQsUVfw https://a.aliexpress.com/_EyNNtqo

I have a guy who is working this retrofits for vag

Thanks Today i get 5q0035864B and newer USB i know it s without DAB i bought it becouse it was realy good price. So now waiting to put everithing together

Vin: TMBJK7NE8F0135702

Yes i know becouse of resolution. Like i said i already bougt this lcd , now need to buy unit- i just want to know which unit would be compatible with screen, i know it s not just coding bit also CP….etc i have guy who will fix al this and install but just need to know which PN for unit should i search to BUY which would be chepest option(skoda,seat,…) With navi and dab of course Thank you

Hello i gave octavia 2015 with old Mib1 5E….. i bought lcd with pn 5E0919605M from newer octavia -glass touch lcd. Which unit PN should i get to be possible to code it on that screen with dab and navi? I know that 5q0035874 would fit but is there any cheaper solution or anyone has it for sale?

Also tried to look up with measurment with vcds all dors lock /unlock, and open closed normaly when vieving in vcds. Does tank lock have anything to do with that? I changed it but its. Ot original does it have any microswitch? I unpluged it but it has only 2 wires

I tried to lock with key on doors but it normal lock and unlock all doors. Any other option how/what to check

Yes it shows if they are open, i had little crash in front bumper so i thought it may be the problem in microswitch on bonnet , but it show all doors, also when i open doors the interrior light came up on all doors. I tryed and all dors all locked , i ll try tomorow also what hapens if i lock with the key if there will be any difference

It was becouse i took the battery clamps down for 10minutes, the infotainment speakers have faults bcouse they are not connected they are connected to hify amplifier. What about microswitch am i thinking right? If they are showing on dashboard when i open doors they are ok right?

But if there would be problem with locks or microswitch in locks then one door would not lock right? And i think all microswitches works becouse i see on dash which door /boonet/ trunk is open they all light up on dash when i open. is there any fuse adicted only to Lock flash? Becouse like i said only when locked dont flash

Here is scan from my Launch diagnostic i can also scan with vcds but must get it i dont have it right now if it would be better? i think this function limitation active protector is becouse diagnostic was connected to car when driving

Engine: 2.0 TDI RS Type: Combi Mileage: 325.000km Cambelt changed 2 times Gearbox oil changed 2 time Any other major work done? Replaced clutch and flywheel on 300.000,

Helloi have problem if anyone can help. One day just stop working flashers when i lock the car. When i unlock it flashes normaly. i had bad lock for fuel it didnt locked i thought this is problem so i replace it , delete fault codes but the same no flash at lock? Anyone know where is problem, i also try to take of the clamps of battery with no results

Did anyone find any option?

Yes i think this switch is ok with front camera but the fact is “i think” that camera would give signal but on the radio you wont see it becous you put out of reverse and canbus stops video from rear camera when you put out from reverse and there would be no picture. You should find somehow to code that video go to can bus also in 1 gear to turn on camera i also would like to find how can be done

Hello no i didn get any code, today i fixed it i tried to reset all values on 09 central electronic and now it works if anyone would have the same problem ,but i dont know what coused the problem.

Anyone have any idea?

Yes when i turn it on with diagnostic it actualy heat

Hi can someone help me here, i tried to search on forum i found posts but no one didnt mention how to fix it. My rear window defrost is not working,when i turn it on the light on switch shut off after 1sec and Relay does not operate. id i turn it ON with diagnostic relay clicks and and defrost work normaly- but only with diagnostic. Can anyone help ?

Did anyone fix this? I have the same problem when i push defrost buton it turns off after 1 second ,also relay does not click, when i turn it on with scanto relay is normal working, i also tried with new rear lick mechanism but ita the same?

I dont have a file becouse this was about 2 years ago when i was coding and i newly installed Windows on My computer🤦‍♂️ Any other option how can i get to oem file or from another car

Yes i was adapting Leutche that i remember but dont know which

Anyone with Vcds and octy 3 RS who would have some time to help me? I would just need list of coding from lights, so that i can code them like they are original? I would be very thank ful becouse i have problem with registration my car

I dont think that this switch would work, becouse bcm detects reverse and send Can signal to radio to turn on camera, but when you ll push switch on that modul it will turn on the camera but wont be avle to seen on radio becouse BCM does not know and does not send Can signal to turn on screen for camera,. I am not sure if i am right but i was thinking about that that it wont work, only if you would i stal some swith betwen bcm and reverse swith that you could turn it on when you have in 1 gear that will turn it on but also then the reverse lights would light...