-
Posts
70 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Shop
Events
Downloads
Posts posted by marky t
-
-
Have been running a wheel alignment day with hampshire subaru forum over the last few years and as i now own a skoda i thought it would be right to include briskoda this year.
This will be taking place on sunday 28th April from 09:30 at :
The wheel alignment centre
20 City Industrial Park
Southern Road
Southampton
Hampshire
SO15 1HA
02380 332906
http://www.wheelalignmentcentre.co.uk/
This is off of west quay rd.
There will be a max charge of £50 depending on what's done.
Note this is a proper wheel alignment not just tracking.
Get your names down gents,limited to around 12 cars and i will be posting this up on hampshire subaru forum.
we can organise time slots later.
1:marky-t octavia vrs
2:
- 1
-
My ufi filter came with a new seal.
-
DOH!According to his profile it's a DSG.
No clutch pedal to depress.
-
I also need this part :wonder:
looking on etka it looks like you have to buy the whole trim panel.
-
Put your foot on the clutch when turning the engine off,see if that stops it.
-
Have a look at the filter housing,there may be a sticker on it that tells you the manufacturer eg mann hummel or ufi etc.Mine had a ufi sticker and a part no on it.
-
Spot on trudlenut,was running rough when i turned it off so must have just started a regen.
-
Hi chaps,just checked out my dpf
Could someone decipher this for me??
Ignore the temps the car had been parked up for 2 hrs
18:28:12 Group 075: Particle Filter (Exhaust Gas IV)
56.5°C Temperature bef. Turbo Charger
58.5°C Temperature bef. Particle Filter
28.4 % Particle Filter Load Coefficient
23.2°C Temperature after Particle Filter
18:28:12 Group 068: Particle Filter (Exhaust Gas II)
28.4 % Particle Filter Load Coefficient
30.89 Particle Filter Carbon Mass
-9.4 % Carbon Mass Learned Value
18:28:12 Group 070: Particle Filter (Regeneration Status II)
00000000 Status 4 Regeneration
471.8 s Regeneration Time (Total)
1.0 Failed Regenerations
0.0 Successful Regenerations
Is my dpf stuffed???
-
Hi chaps,just checked out my dpf
Could someone decipher this for me??
Ignore the temps the car had been parked up for 2 hrs
18:28:12 Group 075: Particle Filter (Exhaust Gas IV)
56.5°C Temperature bef. Turbo Charger
58.5°C Temperature bef. Particle Filter
28.4 % Particle Filter Load Coefficient
23.2°C Temperature after Particle Filter
18:28:12 Group 068: Particle Filter (Exhaust Gas II)
28.4 % Particle Filter Load Coefficient
30.89 Particle Filter Carbon Mass
-9.4 % Carbon Mass Learned Value
18:28:12 Group 070: Particle Filter (Regeneration Status II)
00000000 Status 4 Regeneration
471.8 s Regeneration Time (Total)
1.0 Failed Regenerations
0.0 Successful Regenerations
Is my dpf stuffed???
-
Thanks guys,guess i'll have to get a card then :think:
I have a makro card but find by the time you add the vat they're not actualy that cheap
-
We have a costco opening in southampton soon,just wondering if its worth getting a card??
-
Rainworth via ebay shop always been good for me
-
Any one in the southampton area that wants this done i can organise a group day at the wheel alignment centre west quay road as i have been doing this for hampshire subaru for the last few years(i had an impreza before my octy).
Nick that runs the place is a top bloke http://www.wheelalignmentcentre.co.uk/contact.htm
-
So I don't need to buy any sticky pads then?
-
Hi chaps,i have just ordered front and rear citigo badges for my octy,part nos ending 601 and 603,can someone who's already fitted them do a"how to" on fitting?
I mainly want to know how they are secured.
Cheers
-
@moonman2 try winchester motor co or meadens of sway,i believe these are better than sparshatts.Check out the reviews
- 1
-
-
Welcome fellow southampton person :sun:
-
Hello and welcome,enjoy your vrs
-
Avoid the cheaper karcher's as the plastic pumps dont last,I have a karcher 6.80 and its been fine for the last 3 years and it gets used every week.
Whatever make you get make sure it has a metal pump head.Got a good deal from http://www.cleanstore.co.uk/
-
Welcome along from another sotonian :sun:
-
Anyone??? this is driving me nuts i know its only a minor thing but it should work and i doesnt.Did a scan with vcds and no issues although there may be a way of testing the led with vcds that i'm not aware of.
Had a word with the stealers and they are quite happy to charge me to check things out and if its a wiring fault they said it wouldnt be covered by the warranty.
Come on guys,someone else must have had this problem
-
Have a look here
http://www.briskoda.net/forums/topic/47196-how-to-remove-octy-ii-door-cards-speaker-sizes/
I took off my drivers door card yesterday to investigate a non working alarm led and it only took me 5 mins max.
-
Checked the alarm,it works fine, it's just the flashing led thats not working :wonder:
southampton wheel alignment day.
in South East (Central) Meets
Posted
1:marky-t octavia vrs
2: Gti Jazz Blue - Octavia vRS (FL)
3. Codroe23 - fabia vrs
4:Mark - bmw 335d 10:30 slot
5:Chris D- WRX
6:Thatch WRX STI
7:Carl Monte-fabia(9:30 slot
8:matty - wrx 10:00 slot
9:
10:
11:
12: