I'd been looking at the three gauge DIN panels from 42 draft designs for a while...

http://www.42draftdesigns.com/

but was always a bit disappointed that they didn't do international shipping.

I think that Awesome GTI stocked them for a while but don't seem to any longer :(

Then I noticed the other day that Autosystems based in Ireland stocked and delivered the very same kit and are directly linked on 42 Drafts website...

http://www.autosystems.ie/

Worth a shot I thought, so I sent autosystems an email asking whether they could help me. I immediately got an email back saying that yes of course they could. They had the solution 4 that I wanted in stock and are even sending me some green LEDs to match it to the tavias clusters. So by next day delivery these were delivered by Postman Pat

Pete, excellent stuff. I bought a 3-gauge pod about 12 months ago from IP but have been too lazy to sort the remainder of the gubbins out. Those VDO gauges are the ones I wanted too.

The pod I got is here: http://www.impossible-performance.cwc.net/index.htm

You couldn't make a note of the VDO part numbers could you. I was having a problem sourcing a tee-piece adaptor for the oil press sender in particular.

You couldn't make a note of the VDO part numbers could you. I was having a problem sourcing a tee-piece adaptor for the oil press sender in particular.

Sorry Jimmy, mines an oil temp kit which is part number 42-152

If you are really stuck for installation kit then I would e-mail

[email protected]

and ask if they can sort you out. I found them really really helpful.

Pete' date=' excellent stuff. I bought a 3-gauge pod about 12 months ago from IP but have been too lazy to sort the remainder of the gubbins out. Those VDO gauges are the ones I wanted too.

The pod I got is here: [url']http://www.impossible-performance.cwc.net/index.htm[/url]

You couldn't make a note of the VDO part numbers could you. I was having a problem sourcing a tee-piece adaptor for the oil press sender in particular.

IIRC have a chat with DaveU.......can't remember if it was theoil temp or pressure he's got. Anyway he had to drill a hole and put a sensor in the sump plug.....I guess it's the temp then.

Give Mike @ IP a ring - IIRC he has the tee-piece adaptors for the pressure. Oil temp will need a drilled out sump plug.

Hello guys,

Sorry for bringing up an old topic but I'd like to know if I can fit the gauge panel in my fabia under the stereo.

Best, can I put the lower the stereo to put the gauge panel above ?

thx