Can't Access Control Conv module (#46)

[GrahamY]

Hi,

I have just got my VCDS (HEX+CAN) and have run a fault code check and I appear to be unable to access the Control Conv module #46

I have an Octavia vRS FL Estate - November 2009 and am using the HEX+CAN and 908.1 software

The output below shows that the moddule #46 is OK, but it just skips it as can be seen.

Any ideas?

Thanks

Graham

Tuesday,16,February,2010,12:15:21:06835

VCDS Version: Release 908.1

Data version: 20091018

Chassis Type: 1K0

Scan: 01 03 08 09 10 15 16 17 19 25 2E 42 44 46 52 56 62 69 72

VIN: TMBUH21ZXXXXXXXXXX

01-Engine -- Status: OK 0000

03-ABS Brakes -- Status: OK 0000

04-Steering Angle -- Status: OK 0000

08-Auto HVAC -- Status: OK 0000

09-Cent. Elect. -- Status: OK 0000

10-Park/Steer Assist -- Status: OK 0000

15-Airbags -- Status: OK 0000

16-Steering wheel -- Status: OK 0000

17-Instruments -- Status: OK 0000

19-CAN Gateway -- Status: OK 0000

25-Immobilizer -- Status: OK 0000

2E-Media Player 3 -- Status: OK 0000

42-Door Elect, Driver -- Status: OK 0000

44-Steering Assist -- Status: OK 0000

46-Central Conv. -- Status: OK 0000

52-Door Elect, Pass. -- Status: OK 0000

56-Radio -- Status: OK 0000

62-Door, Rear Left -- Status: OK 0000

69-Trailer -- Status: OK 0000

72-Door, Rear Right -- Status: OK 0000

<snipped bits>

-------------------------------------------------------------------------------

Address 42: Door Elect, Driver Labels: 1K0-959-701-MIN3.lbl

Part No SW: 1T0 959 701 T HW: 1T0 959 701 T

Component: Tuer-SG 009 2114

Coding: 0000756

Shop #: WSC 73430 790 00000

No fault code found.

-------------------------------------------------------------------------------

Address 44: Steering Assist Labels: 1Kx-909-14x.lbl

Part No: 1K0 909 144 J

Component: EPS_ZFLS Kl. 74 3001

Revision: 00H17000

Shop #: WSC 73430 790 00000

No fault code found.

-------------------------------------------------------------------------------

Address 52: Door Elect, Pass. Labels: 1K0-959-702-MIN3.lbl

Part No SW: 1T0 959 702 R HW: 1T0 959 702 R

Component: Tuer-SG 009 2114

Coding: 0000756

Shop #: WSC 73430 790 00000

No fault code found.

<snipped bits>

[Theresias]

Quote from matrix... "There is no spoon."

46 got incorporated into 09, hence no 46 anymore - just 09.

[GrahamY]

Quote from matrix... "There is no spoon."

46 got incorporated into 09, hence no 46 anymore - just 09.

Thanks,

That'll explain it :yes:

[Mike 'kropeck']

Hi GrahmY!

Are you from Great Britain or other, RIGHT SIDE STEERING WHEEL country?? :-)

Would you be so kind to share with your 09 - central electrics coding?? :-) I'll appriciate for that.

[GrahamY]

Hi GrahmY!

Are you from Great Britain or other, RIGHT SIDE STEERING WHEEL country?? :-)

Would you be so kind to share with your 09 - central electrics coding?? :-) I'll appriciate for that.

Mike,

I will try to remember to get a scan of the 09 when I next get home in a few weeks.

Graham

[zeecue]

I hope its okay i use this tread also.

I have a Skoda Superb 2004 model 1.9 TDI, and i actually cant acces 46 Central Conv. Module after i changed the coding to selective unlocking, does anyone know a fix for this?

I have never encountered this problem before with any VW or Audi.

Best Regards