Folks, I'm having a Fabia 1.2 12v htp.

I want to add cruise control and trip computer.

Do Fabia II's ECU, supporting trip computer and cruise control?

so,,..

new signal arm and the wiper arm just enough to get it?

Thank you in advance for your reply..

up!

Cruise here:

http://www.accessories.skoda.co.uk/productsList.aspx?type=a&id=10&main=Transport+and+Towing⊂=Cruise+Control

I don't know which ECU your car will have but the dealer should I guess.

Don't know about the display.

Off topic slightly, but that is a very useful link for official Skoda accessories for all models.

Do Fabia II's ECU, supporting trip computer and cruise control?

There is no straight forward answer to this, but if you got an Auto-Scan from the vehicle in question we might be able to tell for sure.

There is no straight forward answer to this, but if you got an Auto-Scan from the vehicle in question we might be able to tell for sure.

How can you see this than?

I've got Vag-com, and i olso want to add CC

By checking the actually installed part numbers and software versions, both is being shown in the scan.

Oke, I've done a auto-scan, found some part numbers and software versions

But where can i find which ecu i need for CC

Oke, I've done a auto-scan, found some part numbers and software versions

But where can i find which ecu i need for CC

It will be the engine ECU address 01

yes, oke

but now i have found the ecu number, en how can i check CC will be possible?

by coding or by adaption?

Mind posting that scan? It's really a lot easier to do this for you than going through the process of explaining how. One of the reasons behind that is that you most likely do not have access to the necessary data (like parts catalog) to check into this.

Mind posting that scan? It's really a lot easier to do this for you than going through the process of explaining how. One of the reasons behind that is that you most likely do not have access to the necessary data (like parts catalog) to check into this.

i've send you a massage

Officially there is no CCS available for your car, the reasons that have been stated in the past are that the engine does not have enough power to leave enough room for the CCS to operate. So for example the CCS shuts off when climbing up hills.

We have seen that been proven wrong in the past by people just retrofitting CCS anyway but I have not seen such an attempt with an engine similar to your. If you are willing to try it anyway, I'll be happy to assist.

but if I buy the lever with CC for my type,

install it and use vcds to switch it on

it must work?

Why "must" it work? If the ECU does not support CCS it doesn't make a difference if you install a switch or not - and exactly that is the question. Does it support it or does it not.