HI All

i have scratched the radio console trim while messing

so i got me a replacement panel to put in but i dont know how?

i can get the radio etc out but i dont know how to remove the actual trim.

any help please or show me how get it out

tar

Phil

Edited 15 March, 201214 yr by feebs

It the radio panel you can see here. not my car - just a pic i have found. i need to try an remove the trim around the radio and put the newer panel i got in.

Any one help me

http://www.briskoda.net/forums/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=11120

Not sure if it's what you are looking for but I removed the two end blanking covers on the switches above which removed the two long thin strips either side of the radio revealing screws fixing the radio surround.

I don't understand what you mean either - would a photo of it help?

The whole unit that sits under the dash that hold the radio, buttons and heater control I wasn't to remove.

Where the blanking plates are that cover the cup holder holes are I have a big scratch down the trim so I want to replace it

Thanks

Phil

The vertical bits unclip with persuasion. A wrapped large flat bladed screwdriver inserted from above, between the top of the trim and the end dummy button. Need to exert some pressure downwards and try twisting the blade a little until it pops out. Do the LHS one first them if you fark it, buy a cup holder.

Still not really sure what you mean - I can only assume you mean the whole centre console? Perhaps if you posted a picture of what you're trying to put in, people would understand which part you mean. Doesn't the new part itself give you clues as to where the fixings are?

I think you're going to have to just pitch in and start taking everything apart you can find - but it's going to be involved...

yeah thats a good word to use. could think of plenty other words but center console never came to mind - damit

the "Center Console" is what i have to get fitted. I can see some of the fixings.

i can also see 2 of the fixings are just under the centre vents where the hazard light swithc is.

thats prob the bits thats worrying me that i needs to mess with the whole dash which is why i was asking.

thanks

Phil