Hi!

I updated to 11.11.4 and upon running a scan got the following, the radio errors and CAN gateway errors were always there but the Central Electronics Malfunction 0010 (cannot be reached) wasn't there before the update. Any pointers?

Thursday,20,September,2012,23:09:24:35444

VCDS Version: Release 11.11.4

Data version: 20120807

--------------------

Chassis Type: 1K0

Scan: 01 03 08 09 10 15 16 17 19 25 42 44 46 52 56 62 72

01-Engine -- Status: OK 0000

03-ABS Brakes -- Status: OK 0000

04-Steering Angle -- Status: OK 0000

08-Auto HVAC -- Status: OK 0000

09-Cent. Elect. -- Status: Malfunction 0010

10-Park/Steer Assist -- Status: OK 0000

15-Airbags -- Status: OK 0000

16-Steering wheel -- Status: OK 0000

17-Instruments -- Status: OK 0000

19-CAN Gateway -- Status: Malfunction 0010

25-Immobilizer -- Status: OK 0000

42-Door Elect, Driver -- Status: OK 0000

44-Steering Assist -- Status: OK 0000

46-Central Conv. -- Status: OK 0000

52-Door Elect, Pass. -- Status: OK 0000

56-Radio -- Status: Cannot be reached 1100

62-Door, Rear Left -- Status: OK 0000

72-Door, Rear Right -- Status: OK 0000

-------------------------------------------------------------------------------

Address 09: Cent. Elect.

Cannot be reached

-------------------------------------------------------------------------------

Address 19: CAN Gateway Labels: 1K0-907-530-V4.clb

Part No SW: 1K0 907 530 AA HW: 1K0 907 951

Component: J533 Gateway H16 5223

Revision: H16 Serial number: 4120K098260203

Coding: E9A07F06000202001303

Shop #: WSC 33361 790 00000

VCID: 66C865F951EDB928BB9

2 Faults Found:

01305 - Databus for Infotainment

004 - No Signal/Communication

Freeze Frame:

Fault Status: 01100100

Fault Priority: 1

Fault Frequency: 254

Reset counter: 177

Mileage: 35260 km

Time Indication: 0

01304 - Radio

004 - No Signal/Communication

Freeze Frame:

Fault Status: 01100100

Fault Priority: 2

Fault Frequency: 1

Reset counter: 111

Mileage: 35260 km

Time Indication: 0

-------------------------------------------------------------------------------

Address 46: Central Conv.

Cannot be reached

-------------------------------------------------------------------------------

Address 56: Radio

Cannot be reached

End ---------------------------------------------------------------------

Firstable do a hard reset of navi, then clear all errors and check again. If dissapired nothing to worry. Beside cent el these are standard errors after navi update.