Hi all. We've an S spec combi. The rear armrest is nice and padded, but it doesn't have the cup holders or cubby box inside.

Is there anywhere that I could source a cheap replacement with these features? The interior is black fabric.

Thanks in advance. Hoping sub £60 but will pay extra if needed.

Does anyone have a part number I could use to find the centre armrest with the cup holders?

Hi Svend,

My ETKA is from 2010 so is really old but I hope this can help you. From the below diagram see part numbers for parts 21 and 25. Try to confirm that your PR codes (on a sticker in your spare wheel well) match at least one of the PR codes below to ensure that the material (cloth, colour) match:

(21) 3T0885081P Armrest (Cloth) PR 4M0 N0A N0E

(25) 8P0885995 Drinks Holder

I'm not sure if you can just add the drinks holder into your existing armrest or if you need a whole new armrest plus drinks holder.

Good luck!

Edited 15 April, 201313 yr by wokwon

Thanks for the reply wokwon. It's appreciated. It doesn't look like it can be added to, as the armrest itself is one piece fabric. But as it's only held on by four screws it should be a quick switch over.

How about a used one from a scrapyard and then get it retrimmed ??

Its going to cost more than £60 though

It's essentially the bolster I want or rather need as I can't see there being a difference in how the bolster/armrest is attached.

I’m know it’s an old post but did you have any luck changing your rear armrest to one with a cup holder?