As the title, the wipers seem to be on permanently in the 2nd speed setting, but they go to the fast wizzy wipe setting on the stalk, but slow them down to constant or intermittent or off and they stay on the constant speed, fuse okay, any ideas :/?

Thanks danny

had a look when i got home, all 3 fuses are okay, cant see any visible wiring damages to the motor etc, disconnected the battery and left it, re checked and still doing it, basically was fine untill yesterday, coming out of the services they came on, no matter what i did with the stalk they stayed constant speed, and been on and off doing the same,

thanks danny

jsut had vcds on, the stalk seems okay as under measuring blocks it switches between each setting as it should, and the potentiometer works on all the 4 stages of intermitent, but even in off, with the measuring blocks all saying off, they still work

bit of a update, tried a known working stalk, still the same, so rules out stalk etc, next idea is the CCM, as Ive just realized the passenger window does not work correctly ( one touch) and doesn't go right to the top, the rear washer comes on with the rear wiper on, instead of push back for wiper, hold right back for wash, next Q is, do they need to be programed? or can i put one in from another model with the same part No?

thanks again

Just realised I've got a 00897 windshield washer pump v5 imlausible signal fault, does this help any one ?

thanks Danny

Sorted it now, purely accidentle to, stripped the boot lid down, and smelt burnt, so un bolted it, and being butter fingered dropped it, which the rear plastic popped off, exposing a very rotten circuit board!