right on the hunt for trying sort my starting issue out and i have come accros a few codes which i cant figure out. first one i think is down to installing a smaller gasket on the EGR?

-------------------------------------------------------------------------------

 

Address 01: Engine        Labels: 03G-906-018-BMN.clb

   Part No SW: 03G 906 018 EL    HW: 03G 906 018 EL

   Component: R4 2.0l PPD1.2 G    9631  

   Revision: --H42---    Serial number: SKZ7Z0G4077420

   Coding: 0000072

   Shop #: WSC 73430 790 00000

   VCID: 73E51845120902802D9

 

1 Fault Found:

001025 - EGR System 

               P0401 - 006 - Insufficient Flow - Intermittent

             Freeze Frame:

                    Fault Status: 00000001

                    Fault Priority: 1

                    Fault Frequency: 1

                    Reset counter: 38

                    Mileage: 81111 km

                    Time Indication: 0

                    Date: 2000.00.00

                    Time: 17:51:59

 

             Freeze Frame:

                    RPM: 2080 /min

                    Torque: 64.0 Nm

                    Speed: 72.0 km/h

                        84.63 %

                        95.55 %

                    Mass Air / Rev.: 277.9 mg/str

                    Mass Air / Rev.: 414.2 mg/str

 

Readiness: N/A

 

-------------------------------------------------------------------------------

 

second fault is this one which i am stumped by?

 

 

-------------------------------------------------------------------------------

Address 46: Central Conv.        Labels: 1K0-959-433-MAX.clb

   Part No SW: 1K0 959 433 BT    HW: 1K0 959 433 BT

   Component:    KSG PQ35 G2  020 0203  

   Revision: 00020000    Serial number: 00000000000000

   Coding: 81801A085283007F3F02050FC0085F96907C00

   Shop #: WSC 73430 790 00000

   VCID: 8305C885C2A9B200BD9

 

   Subsystem 5 - Part No: 1Z0 951 171 

   Component: Innenraumueberw.008 4801  

   Coding: 00000000

   Shop #: WSC 73430  

 

   Part No: 1K0 951 605 C

   Component: LIN BACKUP HORN H03 1301

 

   Component:       NGS n.mounted     

 

1 Fault Found:

01135 - Interior Monitoring Sensors 

            004 - No Signal/Communication - Intermittent

             Freeze Frame:

                    Fault Status: 00100100

                    Fault Priority: 4

                    Fault Frequency: 1

                    Reset counter: 148

                    Time Indication: 0

 

 

-------------------------------------------------------------------------------

 

third one appeared from when installed the new headunit and new gateway?

 

 

-------------------------------------------------------------------------------

Address 56: Radio (J503)       Labels: 5M0-035-1xx-56.clb

   Part No SW: 1Z0 035 156 F    HW: 1Z0 035 156 F

   Component: BOLERO        010 0054  

   Revision: 0A001001    Serial number: SKZ1Z3K8451464

   Coding: 0D0004000001

   Shop #: WSC 73430 790 00999

   VCID: 3561E65D9CFD5CB0C3D

 

2 Faults Found:

01044 - Control Module Incorrectly Coded 

            000 -  - 

             Freeze Frame:

                    Fault Status: 01100000

                    Fault Priority: 5

                    Fault Frequency: 1

                    Reset counter: 89

                    Mileage: 80744 km

                    Time Indication: 0

                    Date: 2000.00.00

                    Time: 14:14:28

 

01327 - Control Module for Parking Aid (J446) 

            004 - No Signal/Communication

             Freeze Frame:

                    Fault Status: 01100100

                    Fault Priority: 6

                    Fault Frequency: 1

                    Reset counter: 89

                    Mileage: 80744 km

                    Time Indication: 0

                    Date: 2000.00.00

                    Time: 13:48:20

 

 

-------------------------------------------------------------------------------

 

any help guys would be much appreciated

Not sure about 1

 

I get 2 every now and again, I clear it and it goes away for a while and the alarm still works properly.  You can change the interior sensor which should resolve the problem.

 

As for 3 what did you change exactly, was it the CAN gateway?  Do you have Parking Aid fitted.  If you changed the CAN gateway was it a brand new one?  Did you copy the coding exactly from the old one?

Do these decodes from the Ross-Tech Wiki help?

http://wiki.ross-tech.com/wiki/index.php/16785/P0401/001025

http://wiki.ross-tech.com/wiki/index.php/01135

http://wiki.ross-tech.com/wiki/index.php/01044

the first one appeared after installing a smaller gasket (smaller hole) to solve the juddering which thankfully it has, (the whole lot will be removed shortly anyway along with a remap)

 

2nd one is strange, alarm works fines, chime works and the interior sensors set the alarm off nicely when i put my hand in a open window but just wont disappear.

 

3rd one was a precoded CAN gateway from eddie-nl so i can upgrade my steam unit to a bolero unit, parking sensors (or is a parking aid different?) were original on the car 2007 skoda octavia VRS  

I would look into changing the interior sensor if the fault is constant.  It's in the roof, behind the grill to the rear of the front interior light.

 

With the radio, I would check through the coding and look for anything obviously wrong.  Presumably the parking sensors controller doesn't log any faults