I used the ross tech tutorials to gather the following,

Stock Map:180.1 Hp @ 5840 RPM & 187 ft/lb @ 2320 RPM

Revo Trial: 187.2 Hp @ 4720 RPM & 231.4 ft/lb @ 3560 RPM

The car is a standard 03 Octy vRS, so the standard figures seem about right to me but I'm suprised at the difference between the HP and Torque curves they dont seem to be similar at all, although I'll take any advice on that.

As for the Revo curve, Im suprised there was just a 7 Hp increase but staggered there is such a big jump in Torque, 44 ft/lb, pretty impressive I think.

Graphs are Block 120 Torque/BHP:

Block 115 - Boost:

Block 002 - A/F Ratio

Thanks for any advice, all comments welcomed

Rgds Rich

HP goes up with the revs, torque is amazingly flat (this is a good thing IMHO).

Not bad at all