This may have been discussed, if so I couldn't find it! My project car (budget octy MK1 VRS) came with no front ARB. on my tight budget, I'm looking for a cheap alternative, (stock vrs, tt, etc, may have budget for a rear arb later) no VRS ARB's on evilbay etc at the moment, I am wondering if I will get away with the 225 TT front ARB for now? it's only one mm thicker I think?

Mk1 I assume?

Sorry! yes Sir!

 

***amended***

Spent the evening hunting around the google, I found this pretty good thread (golf mk4)  http://www.edition38.com/forums/index.php?showtopic=326881&hl= audi tt arb&page=6  but answers a few questions, going to order a TT F ARB and see how I get on............

How much are you looking to spend, r32 FARB is an option and if you find 1 on fleabay they aren't to badly priced

Sent from my iPhone using Tapatalk

r32 23mm bar is only good if you are upgrading the rear too at the same time to something like a 24-28mm rear bar (28mm best with the 23mm front r32 bar imo) otherwise you will increase understeer (already bad on these)

 

i probably have a spare vrs stock bar for sale if i can find it, pm me if you want.

Cheers all, I found a cheap tt bar (19mm) going to run with that and short links as it will be fairly low and I dont want any drive shaft contact....