I purchased a fault code reader as warning light kept appearing. would be grateful of any advice as to what exactly is causing the following faults and how to rectify and expected cost.

 

Eng 16726 - Camshaft position sensor

ABS - 18265 - Malfunction indicator light

ABS - 01314 - ECU - No communications

 

It is a 56 plate 1.2 fabia, seems to be running fine.although only used for short journeys and it was my dads and only done 14000 miles.

ENG http://wiki.ross-tech.com/wiki/index.php/16726/P0342/000834

 

ABS http://wiki.ross-tech.com/wiki/index.php/18265/P1857/006231

 

ABS http://wiki.ross-tech.com/wiki/index.php/01314

 

Clear the stored faults and rescan

cleared them on Sunday and they came back again today. saying that didn't rescan after clearing

Anyone any ideas how I can fix the faults?

Did you check all the faults listed on the rosstech website, once you have fixed the faults (physically) the eml light and codes will stop 

 

 

• Check Wiring from/to Camshaft Position Sensor (G40)
• Check Camshaft Position Sensor (G40)
• Check Timing

Possible Solutions

• Check CAN-Databus Wiring/Connectors from/to Engine Control Module
• Check Measuring Value Blocks (MVB)
  • Usually Measuring Value Blocks (MVB) 125+ show the current Communication Status

Thanks not that technical so will pop it into garage