Hi guys,

 

After switching BCM module from a 3c0 23 byte to a 3c8 30 bit module everything is working excactly as intended, however - the light in the lightswitch remains on even if i lock the doors. - Just the middle of the lightswtich (the switch itself), not the outer ring where it says what mode the switch is set to.

 

Any idea as to where the coding might be wrong, or what else i might have missed?

Tried changing the lightswitch.. No change.. Battery was empty this morning so obviously it's discharging.. Can it be a combination of modules?

What was the reason of the change in the first place? It is odd that the switch is the only thing being fed and no other lights.

Main reason was to gain new features.. Cornering lights to be specific :-) - I am wondering if it might be an old can bus module causing it to not shut down properly.. Any idea if this might be the case with these modules as it is with newer radios etc?

Seems like a new can gateway solved it :-)