I want to add things like LED footwell lights, in-car dash cam etc, but I want to obviously have these powered appropriately (i.e. open door, footwell lights come on, start ignition, camera comes on) rather than have cables everywhere which go into the 12v socket.

 

Anyone know a) where the fusebox is on the Citigo (i had a very quick look this morning and can't see it) or where I can get hold of a wiring diagram, or c) offer me any advice as to how I can complete such projects? I'm competent when it comes to doing this sort of thing, but I'd like to know which wires I can use off the back of the fuse panel.

I have a 1.0 Greentech 2dr on a 12 plate

Thanks in advance.

Edited 17 April, 201511 yr by timbotay

Fuse box is to the right of the steering column just underneath.

For footwell lights you can use the interior light unit to wire to and trail it down the pillar trims.

For a cam you can pick up an ign fed unit for this. Eg: a feed from the cigarette lighter/12v socket they call it now.

Sent from my iPhone using Tapatalk