Hello,

 

I had SWING unit and retrofitted to RNS315. Everything is working, sound is nice too, but those two faults is always here.

Can someone help me to get rid of those two faults? What is actually wrong?

 

Chassis Type: 5J (6N0)

Scan: 01 03 08 09 15 17 19 25 2E 37 44 56 77

 

VIN: TMBEM65J1D3064440   Mileage: 40590km-25221miles

 

01-Engine -- Status: OK 0000

03-ABS Brakes -- Status: OK 0000

04-Steering Angle -- Status: OK 0000

08-Auto HVAC -- Status: OK 0000

09-Cent. Elect. -- Status: OK 0000

15-Airbags -- Status: OK 0000

17-Instruments -- Status: OK 0000

19-CAN Gateway -- Status: OK 0000

25-Immobilizer -- Status: OK 0000

2E-Media Player 3 -- Status: OK 0000

37-Navigation -- Status: Malfunction 0010

44-Steering Assist -- Status: OK 0000

56-Radio -- Status: OK 0000

77-Telephone -- Status: OK 0000

 

-------------------------------------------------------------------------------

 

                Address 37: Navigation       Labels: 1K0-035-27x-37.clb

Control Module Part Number: 3T0 035 192 C    HW: 3T0 035 192 C

  Component and/or Version: RNS315-EU   H33 0263

           Software Coding: 000004110100000000010001

            Work Shop Code: WSC 33361 790 00999

              ASAM Dataset: EV_RNS315EUV2UDS A01004 (SK25)

                       ROD: EV_RNS315EUV2UDS.rod

                      VCID: 2E462DCF2017BCF2BDAC28D-807A

2 Faults Found:

 

1048652 - Telephone Microphone 

          B1048 13 [009] - Open Circuit

          Confirmed - Tested Since Memory Clear

             Freeze Frame:

                    Fault Status: 00000001

                    Fault Priority: 5

                    Fault Frequency: 1

                    Reset counter: 97

                    Mileage: 40599 km

                    Date: 2038.14.18

                    Time: 13:06:19

 

1048641 - Control Module Incorrectly Coded 

          U1014 00 [009] - -

          Confirmed - Tested Since Memory Clear

             Freeze Frame:

                    Fault Status: 00000001

                    Fault Priority: 5

                    Fault Frequency: 1

                    Reset counter: 97

                    Mileage: 40599 km

                    Date: 2038.14.18

                    Time: 13:06:19

 

The HU thinks a Bluetooth module is attached, but it isn't.

Sent from my D5803 using Tapatalk

I have a bluetooth module attached. It was working on SWING and also working on RNS315..

Edited 2 April, 201610 yr by H2M

I have a bluetooth module attached. It was working on SWING and also working on RNS315..

Misread it. There is a problem with the microphone. Check the wiring.

Sent from my D5803 using Tapatalk

Wiring looks good. Microphone is working fine and with old unit there was no mistake too. 

I am more worried why it says Control Module Incorrectly Coded 

Edited 2 April, 201610 yr by H2M

If the microphone is working fine (and assuming you have already cleared the faults and they keep reappearing), maybe you should turn off the "Microphone diagnostics" bit from the Long Coding, if you can find it?

Exactly, was thinking about it, gonna try that soon. 

Ok, i find the problem. Only needed to to clear internal bluetooth from 37-Navigation and all mistakes dissapeared. I have external bluetooth module connected, no internal bluetooth.

Thanks for trying to solve my problem

 

trundlenut, you were so close

Edited 2 April, 201610 yr by H2M