Good Evening all,

 

I have a quick question?

 

I have just recently purchased H&R wheel spacers,

 

Front 10mm a side     30mm Bolts supplied

Rear 15mm a side      40mm Bolts supplied

 

My question is what size locking nuts should I get?

 

 

 

 

 

Same length as what's been supplied mate.

Search eBay.de for H&R felgenschloss M14x1.5

You need kugel not kegel ones.

That's German for ball taper or cone taper

Also I'd have thought 30mm a bit short for 10mm spacers. Originals are 27mm !!!! I'd do 35mm with 10mm and 40mm with 15,s

Edited 26 May, 201610 yr by Esseesse200

It was H&R that supplied the bolts for the spacers, I'd like to think they would have supplied correct sizes?

I'd hope they were and H&R are generally spot on too but it's a bit weird that a 15mm spacer needs an bolt that is 13mm longer than standard but a 10mm spacer only needs one that is 3mm longer than standard

I agree, I might double check with H&R before putting on front spacers. 

Any news from H&R mate

 

 

Nope nothing at all. I did contact a few companies and they all say they come with 40mm Bolts.  I have fitted the rear spacers and torqued up nicely.

Edited 3 June, 201610 yr by J40SSR

I brought a new pair of H&R locking nuts for the back of mine the other day as I only had a set for the front 12mm spacers but not for the rears. The nuts that came with the 12mm were 37mm and the locking nuts I just brought were the 40mm ones from the link I posted up here. Perfect for 12-15mm spacers I would say

https://www.ebay.co.uk/itm/130710385646

H&R Felgenschloß für Spurverbreiterungen VW 2x M14x1,5x40 Kugelbund /Achse

These