Skip to content

OEM Handsfree cables for Columbus RNS 510

Featured Replies

I have installed handsfree in my Superb and bought a plug & play cables. After i installed this my right front speaker and sound system dont work as they should. 

 

I bought a OEM wiring harness. And i ask if someone here have installed this before? i am not 100% sure how to do it and if i have to connect the orange cables to the can gateway or not.

 

i know that the brown cable is (GND), red (+12V), and orange is (CAN signal high and low)

 

 

IMG_3273.JPG

IMG_3275.JPG

You'll need to connect all four wires to get this working.

 

Easiest place is to tap in to the power and CAN wires on the back of the headunit :)

  • Author

Yes, i have to ;) So that will work without any problems? :blush

 

Here is the pin diagram back on my RNS 510, so i should connect the wires to these links?

IMG_2432.JPG

Edited by 95mathias

  • 7 years later...

How do i power this device on a bench for a test before installing into a car?. Do i have to connect the +12V, CAN- and CAN+ in parallel to the positive therminal of a 12V power supply?

Kindly explain in respect to the diagrame presented.

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.