mk2 FL Octavia vRS 2.0 TSI "stage 2" hardware package (Milltek, EVOMS)

[Mankee]

With a heavy heart, I have decided to sell my 10-plate Octavia vRS, so the "stage 2" hardware bits that I bought for it will not be fitted. I've got a brand new Milltek non-resonated CAT-back system, brand new Milltek decat downpipe along with appropriate Superpro dog bone insert and an Evolution Motorsports V-Flow intake, which I bought used from an Octavia vRS owner but never fitted to mine.

 

With these bits nailed on, R-Tech normally see about 220bhp and 220lbft, but after remapping, it rockets to 275+bhp and 350+lbft. That would have really unlocked the potential of this engine. Unfortunately, I won't be able to experience this for myself. JKM found gains of nearly 8bhp and 12lbft with the addition of the just the EVOMS induction kit to a completely standard car. Good value for money!

 

Anyway, some more details if you want to read up on the bits.

 

The non-resonated exhaust system has Milltek part number SSXSK008 and it's a twin 76.2mm tail pipe design. The part number of the decat downpipe is SSXAU284 and the Superpro bush is part number SPF3365-80K. The CAT-back system will fit both pre-FL and FL petrol Octavia vRSs but the downpipe will only fit the later IHI turbos and not earlier K03s.

 

http://millteksport.com/exhaust.products.cfm?variantid=319

https://www.superproeurope.com/ajax/part.number.cfm?partnumber=SPF3365-80K&vehicleid=3493&productreferenceid=177751

 

There is some more info and pictures of the EVOMS intake on JKM's page, along with some back-to-back dyno runs:

 

http://www.jkm.org.uk/performance/tsi-skoda-jkm.htm

http://www.evoms.com/Evolution_Motorsports_2_0T_TSI_V_Flow_Intake_p/intkvftsi.htm

 

I haven't got any pictures of the actual parts as they are all boxed up 25 miles away but they just look as they are in the links. I am after £800 for the whole lot. I don't really want to courier it all but will consider meeting up somewhere in return for fuel/burger and chips money. I'm based in Ipswich, Suffolk.

 

Someone will enjoy these bits immensely. But not me. 

[Mankee]

Still for sale.

Edited 5 February, 2019 by Mankee

[RedOctaviavRS20]

Would you sell the cat back part of the milltek separate ?

[Mankee]

I'm beginning to consider splitting the package up, yes. However, you're in Belfast and I'm in Ipswich and I'm not too keen on shipping it. Sorry!

[RedOctaviavRS20]

5 hours ago, Mankee said:

I'm beginning to consider splitting the package up, yes. However, you're in Belfast and I'm in Ipswich and I'm not too keen on shipping it. Sorry!

 

No worries I’d cover shipping costs ect 

[RedOctaviavRS20]

On 13/03/2019 at 11:46, Mankee said:

I'm beginning to consider splitting the package up, yes. However, you're in Belfast and I'm in Ipswich and I'm not too keen on shipping it. Sorry!

  

Still not keen on shipping ?

[Mankee]

Exhaust sold and picked up a few weeks ago. Sorry! I've not been able to edit my original post as my Freedom membership has run out.