Is there a way to change the 'Second Speedometer Display' in the Maxi Dot?

 

I realise that it is set to KPH for when driving abroad, but can this be changed to MPH?

The manual is a bet confusing, referring to different sections of the manual, but without actually explaining how to change it.

 

 

 

I have a slightly different requirement if its possible.

 

Living in France as I do I am quite happy with the standard UK setting of a MPH analogue speedometer and the km/h display in the maxidot, it is however very small, I have sight problems especially close up and its difficult to read sometimes.

 

I keep reading postings on the subject of "LARGE MPH display on maxidot" is there some VCDS coding where I could have the km/h digital display in larger font?

 

I dont mind if it has to be on a seperate display from the MFD info.

 

Many thanks.

Edited 27 October, 20205 yr by J.R.

Thanks Kenny, it would seem I'd need VCDS kit but i not fussed about changing any setting to Australia so I'l leave it as it is.

 

I changed that on my Yeti with a Carista OBDII dongle in a few minutes, cost me about £20 and it has full functionality for about a month included in the price and after that even if you do not want to pay more it is still an excellent fault code reader.
https://caristaapp.com/

 

 ^ ^ ^ Large Km, not easily possible, I looked at this several years ago! A recent post by LangersUK (I think) indicated a need to change codes in the eeprom module!!