These clips.

https://www.ebay.co.uk/itm/311484247535

 

Does anyone know how you out them in?

Hard t describe but they just slide onto the back of the trim panel into a 'socket' like theone below and then you just push the panel home and the clip goes into a hole in the door panel.

 

4 hours ago, skomaz said:

Hard t describe but they just slide onto the back of the trim panel into a 'socket' like theone below and then you just push the panel home and the clip goes into a hole in the door panel.

 

Yep the clip should go into a hole but it's not obvious how you do this. 

31 minutes ago, Aj77 said:

Yep the clip should go into a hole but it's not obvious how you do this. 

 

If the clips are in the trim panel sockets correctly they should line up with the hole and then it's just a case of giving the trim panel a push or a sharp bash with your hand where the clip is and they pop in...   no need for anything else.

 

If the clips don't line up with the hole you might need to jiggle the trim panel a bit or nudge the clips into alignment with something.

 

There's loads of online video clips of how to do it...

Edited 22 April, 20215 yr by skomaz

22 minutes ago, skomaz said:

 

If the clips are in the trim panel sockets correctly they should line up with the hole and then it's just a case of giving the trim panel a push or a sharp bash with your hand where the clip is and they pop in...   no need for anything else.

 

If the clips don't line up with the hole you might need to jiggle the trim panel a bit or nudge the clips into alignment with something.

 

There's loads of online video clips of how to do it...

It's not putting the card on, you need to put these clips into the door metal first before you put card on.

3 hours ago, Aj77 said:

It's not putting the card on, you need to put these clips into the door metal first before you put card on.

 

Normally you slide them all on to the door card. Then as you push the door card on to the door, they will clip into the holes for you

5 hours ago, Aj77 said:

It's not putting the card on, you need to put these clips into the door metal first before you put card on.

 

No!  Its the other way round...   As I said put the clips on the trim first and then put the trim with the clips fitted to it onto the door...

Edited 22 April, 20215 yr by skomaz