hi community I installed black Monte Carlo headlights on my Fabia. my concern is that the long headlight does not puncture. an idea ?

thanks 

@Arold10are you meaning that the headlight does not crack if hit by a stone?

 

Use 3M clear protection film on them if that is what you are talking about.

flashing the headlights does not work 
sorry

@UrbanPanzermight be able to help with what you require to do with the conversion to get the full beam flash.

 

There is a thread about with someone else that did as you have had had the same issue.

I'm looking I'm looking I can't find the topic

So here's how a Monte OR RS is wired from factory.

you won't have the relay with normal halogen headlamps. The relay controls the shutter solenoids to open the shutter on the single filament bulbs used in the Bi halogen lamps.

 

You "could" possibly just wire a relay up thats fed from a permanent +12v supply, and then is controlled by the main beam +12v output at your existing headlamp connectors............this would then power the relay to output and open the shutters.

Im not sure "if" you would have a feedback to light the dash main beam lamp or not doing it this way, I don't think so but could be wrong.

 

 

 

 

Edited 29 January, 20233 yr by UrbanPanzer