Skoda Superb Mk II (2011) 2L TDI - ABS module coding

[Rokinys]

Hi all,

 

Background: my original instrument cluster has a few LED lights that are broken and decided to swap cluster without any notion of any programming, etc. Changed it, stared ignition and got a wrong mileage, some error codes and the car, after starting, shut down after a few seconds. Swamped back to original cluster, car starts, however, had a few flickering dash lights (steering wheel, handbrake, ABS, traction control lights).

 

Further steps taken: got myself OBDEleven reader, started to tinker with some additional options. managed to "re-calibrate" steering wheel, no more warning light. Remaining lights are still on and flicker.

 

Remaining faults are the following:

 

As per my understanding, swapping the clusters decoded the brake module, hence, the below snip:

 

 

 

My question is - can i re-code the brake module and maybe get rid off the warning lights on the dash? if so, can someone help identify the long code for my specific system? Any tip/tricks or steps needed would be appreciated.

 

Im pretty new at this, so if any additional info is needed let me know.

 

 

Adding these for possible reference (steering code not relevant, since I managed to fix it:

 

Car Scanner ELM OBD2

DTC report

Selected brand: Skoda

 

============1==============

01304

Raw code: 0518

ECU: 19. CAN Gateway

Status: Test conditions are met, Validated and stored in non volatile memory

Cassette player; radio

 

============2==============

01042

Raw code: 0412

ECU: 03. ABS control unit

Status: Validated and stored in non volatile memory, Validated fault present at time of request

The control unit is not encoded; Control unit not coded; Secondary air injection valve-N112 electrical fault in the circuit

 

============3==============

01435

Raw code: 059B

ECU: 03. ABS control unit

Status: Pending fault present, Test conditions are met, Validated and stored in non volatile memory, Validated fault present at time of request

Brake Pressure Sensor 1-G201; Brake pressure sender 1-G201

 

============4==============

00778

Raw code: 030A

ECU: 03. ABS control unit

Status: Pending fault present, Test conditions are met, Validated and stored in non volatile memory, Validated fault present at time of request

Steering Angle Sensor-G85; Steering angle sender G85

 

============5==============

01423

Raw code: 058F

ECU: 03. ABS control unit

Status: Pending fault present, Test conditions are met, Validated and stored in non volatile memory, Validated fault present at time of request

Lateral Acceleration Sensor-G200; Lateral acceleration sensor-G200

 

============6==============

01304

Raw code: 0518

ECU: 19. CAN Gateway

Status: Test conditions are met, Validated and stored in non volatile memory

Cassette player; radio

 

============7==============

01042

Raw code: 0412

ECU: 03. ABS control unit

Status: Validated and stored in non volatile memory, Validated fault present at time of request

The control unit is not encoded; Control unit not coded; Secondary air injection valve-N112 electrical fault in the circuit

 

============8==============

01435

Raw code: 059B

ECU: 03. ABS control unit

Status: Pending fault present, Test conditions are met, Validated and stored in non volatile memory, Validated fault present at time of request

Brake Pressure Sensor 1-G201; Brake pressure sender 1-G201

 

============9==============

00778

Raw code: 030A

ECU: 03. ABS control unit

Status: Pending fault present, Test conditions are met, Validated and stored in non volatile memory, Validated fault present at time of request

Steering Angle Sensor-G85; Steering angle sender G85

 

============10==============

01423

Raw code: 058F

ECU: 03. ABS control unit

Status: Pending fault present, Test conditions are met, Validated and stored in non volatile memory, Validated fault present at time of request

Lateral Acceleration Sensor-G200; Lateral acceleration sensor-G200