Hello, my car has been having a bad working problem for a long time, first I renewed the ignition system but the problem was not solved. I realized that the problem was caused by the cable and socket. I fixed it temporarily with the means I had. I ordered a fuel injector socket and I am waiting for it to arrive. I will remove the pins on the ECU of my car's fuel injector cables and replace them with new ones, but I do not know which terminal pin I should use. I did some research on the internet but I could not reach a conclusion. After removing the cable in the ECU socket, I do not know what kind of terminal pin I should attach to the new cable (measurement, length)? Is there a table where I can see this? According to what are the measurements determined? I would be glad if you could help.

 

My vehicle - 2004 BBZ FABIA

Which end is the problem, at the connector that goes onto the injector, or at the connector that goes onto the engine ECU?

 

In the connector to the injector

Edited 2 October, 20241 yr by bugra

Thank you very much. If you don't mind, can you also give me the terminal pin number that connects to the ECU? And where can I find this informative document? Thanks again.

Four different pins used in the ECU connector, according to this. 

 

 

 

 

 

Many pirated sources of ETKA info are online, just google "online ETKA" and choose one.