hello, I'm new here, I'm from Slovakia, today while driving, the oil light came on, but there is enough oil, I found a broken cable from the oil pressure sensor, but the owner who sent it fixed it in his own way, and I don't know where the other part of the cable is. can someone help me with a diagram?

Pressure sensors going are common on Fabia's. Had my pressure light start beeping at me on the motorway, scared the crap out of me!

 

I would get a new sensor as well as a cable. For the sake of less than £10 its worth it. I am curious as to what you mean by 'fixed it in his own way'?

 

I don't have a diagram, but here is the link to a new cable/connector. If you have the other end that goes back to the ECU and are good with a soldering iron, you could splice the wires together and put some heat-shrink tubing round it. I'd advice against the 'twist the wires together and slap some electrical tape on it' method, I don't see that lasting long in a hot engine bay.

 

https://www.autodoc.co.uk/abakus/18300934

I can't find the cable in the harness to the ecu, it was fixed by a screw in the connector

Hopefully this will help? Sorry about the two screenshots, I had to piece it together from a terrible website that makes you pay to download the actual doc.

Thank you so much I hope it will help