Hi all.

My Superb needs the link bar that keeps the headlights at the correct hight.

apologies for the poor discription.

james

it sounds like you mean the module on the rear suspension, if thats what you mean here is a link from ebay https://www.ebay.co.uk/itm/335035410181?fits=Car+Make%3ASkoda%7CModel%3ASuperb

On 06/05/2025 at 12:22, Jimbo7274 said:

Hi all.

My Superb needs the link bar that keeps the headlights at the correct hight.

apologies for the poor discription.

First: What is the question?

Second: There are two link bars between the suspension and the sensor, one on the front left and one on the rear left.

On 05/07/2025 at 14:26, andrehj said:

First: What is the question?

Second: There are two link bars between the suspension and the sensor, one on the front left and one on the rear left.

hi i checked the front sensor and found the link bar connecting the sensor to the wishbone had partly cracked leaving a hairline crack triggers the fault, anyways i changed it 2 week ago, all good, i would post pics but pics always seem to big for this site........

This is interesting. I wonder whether this is making my dipped beam lights point a bit lower than I remember previously? I’ll be putting the motorcar up on the Kwiklift tomorrow to change the rear brake pads so I’ll have a look.

My motorcar is the Elegance model with bi-xenon lights.

Alan

14 hours ago, Othen said:

This is interesting. I wonder whether this is making my dipped beam lights point a bit lower than I remember previously? I’ll be putting the motorcar up on the Kwiklift tomorrow to change the rear brake pads so I’ll have a look.

My motorcar is the Elegance model with bi-xenon lights.

Alan

what i found with my old sensor is that the sensor itself if ok and working, the link bar that connects to it and the wishbone, one of the ball joints had filled with crap, seizing it sold hence cracking the plastic link bar, a bit of pre maintance would stop this,

1 hour ago, tomwoods said:

what i found with my old sensor is that the sensor itself if ok and working, the link bar that connects to it and the wishbone, one of the ball joints had filled with crap, seizing it sold hence cracking the plastic link bar, a bit of pre maintance would stop this,

Many thanks - you put me on the right path. I’ve just located the problem:

glad i could help

It is fixed!