Hi All,

Hope all is well.

New to the forum, I have had a quick search for what I'm looking for but no luck.

So, basically while my wife was driving the 2013 Skoda Superb 2.0 TDi 4x4 the ABS / Stabilisation Control (ESC) light came on and then straight after she had a flat tyre.

The car has the ABS, Tyre Pressure, Power Steering, Traction Control error lights on and the Optical Parking System is not available at present when I put it in reverse - my friend thinks this is because everything is linked with the ABS sensor?

We sorted the tyre and my friend plugged his VCDS in to the car which showed front left ABS sensor error.

I purchased a new sensor and we fitted - same error code came back - we tried another abs sensor from a friends car just in case this sensor was faulty... no luck.

The next option was a new Wheel Bearing Kit... fitted without issues and still the error and all lights show on dash.

Next thing we were looking at was the ABS module and wiring, does anyone have the wiring diagram for the ABS module for the front left sensor?

Here's the VCDS error message:

Address 03: ABS Brakes Labels: 1K0-907-379-EC1-V3.clb
Control Module Part Number: 1K0 907 379 BL HW: 1K0 907 379 BL
Component and/or Version: ESP MK60EC1 H31 0152
Software Coding: 863D601609240002610D06E890200082340000
Work Shop Code: WSC 33361 790 00099
VCID: 7DFA82DCE46ACF73B8-8028
2 Faults Found:

00668 - Supply Voltage Terminal 30
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 1
Fault Frequency: 13
Reset counter: 56
Mileage: 268989 km
Time Indication: 0
Date: 2063.14.31
Time: 09:09:51

Freeze Frame:
Count: 16387
Count: 2
Count: 20480
Count: 128
Count: 42240
Count: 0
Count: 65284
Count: 13824

00283 - ABS Wheel Speed Sensor; Front Left (G47)
012 - Electrical Fault in Circuit
Freeze Frame:
Fault Status: 01101100
Fault Priority: 1
Fault Frequency: 1
Reset counter: 52
Mileage: 268989 km
Time Indication: 0
Date: 2063.14.31
Time: 08:59:34

Freeze Frame:
Count: 3
Count: 2
Count: 20480
Count: 32
Count: 43776
Count: 0
Count: 65284
Count: 0

Any help would be very much apricated!

Thanks,

Rich

2 hours ago, Ricky198o said:

The next option was a new Wheel Bearing Kit... fitted without issues and still the error and all lights show on dash.

Stop using the parts cannon and check the wiring to the "faulty sensor" properly.