Mortyy

i can get them for about 1000NOK (about 100pounds) incl. norwegian tax and shipping.

here is what ive found.. i think they could work? http://ows-cdn.tecdoc.net/lesjofors/home.jsp?server=1&time=21/5/2019-20:50:8#e0f3852dfd14ade9e4be18f525bc9025 if im not mistaken that is.. 😛

So you think that its connected to the airbag in the Seat on driverside?

Hi! Wifey has another problem with her car.. Address 15: Airbags Labels: 1K0-909-605.lbl Part No SW: 1K0 909 605 AA HW: 1K0 909 605 AA Component: Q2 AIRBAG VW8 027 0900 Revision: 11027000 Serial number: 003B5D12WE1$ Coding: 0020786 Shop #: WSC 73430 790 00000 VCID: 6BD5926C4A57031218-803E Subsystem 1 - Serial number: 633 SME Subsystem 2 - Serial number: 6342MSME2E6509109 Subsystem 3 - Serial number: 6351HSME11576F079 Subsystem 4 - Serial number: 6361HSME11296F0DF 1 Fault Found: 01221 - Crash Sensor Side Airbag; Driver Side (G179) 010 - Open or Short to Plus - MIL ON is it time for a new sensor? or do i need to go searching for shorts? best regards - Mortyy

I hope you still know the part number? 😛

Hi! The wifey has an 2008 octy combi with (what i think) original springs. what i mean is that its not an 4x4 or an scout, neither is it lowered by factory.. i think 😛 what i was wondering. is it possible to take springs from an 4x4 or an scout and fit them to her car? Ive bought some used wheels, and they do fit with an 245/45R18. But i cant transport anything cause when i load anything in the boot it sags and touches the splashguards.. so thought that a stiffer spring with a bit of a raise in the back would help. best regards - Mortyy

you think i can rock a 245/45R18 with some springs from an 4x4 or a scout? 🤔 i have them on now, and it does ok when i dont transport anything and have taken the spare tyre out.. so acouple of cm more, and perhaps? was thinking of a rear spring spacer.. could that work?

Rear spring out of?

Well, its hooked up to a bulb. But.. Well [emoji23] Naah.. I Think i know what to do with The footwell[emoji4] Sent from my iPhone using Tapatalk

(edited: added photos of LED and Taillights) Well its time for a small update on the car. The car still sits at home. gets a drive to school once a week. a good 60km once a week... actually i feel bad for her :( But since i cant drive it myself for a while i guess ill have to take what i can. So.. some parts has arrived these past few weeks. and i must say that im so excited to show you guys. well.. first the ross-tech VCDS cable came, and i started to mod my car with some functions. functions that are activated atm is: Needle sweep Fogs as DRL's Fogs as corner lights and i cleared some errors with the new rns 510 that i installed earlier this year. (dont have pics of that atm) then i got a small package of LEDs so, full interior with led, fogs and parklight are led atm only thing i want to change is the footwell lights. instead of white i want blue or red i think beyond that im pretty satisfied. fogs. (yeah.. its raining :P) Well.. now for the good parts. I woke up after a graveyard shift here last week by the doorbell, Postman! got a HUGE package arrived. as excited as I was, I forgot to take pictures of the part. (sorry!) i went straight to the bodyshop and got it painted deep black, got it back the day after and waited a couple of days before i started to fit it. lets have a look! can you guess what im doing? yeah.. thats right. cupspoiler! got it for 308euro's from kunzmann in germany. original part it was 200euro cheaper that VW dealer!! well and today.. new package! oh my god i love this angle of the car atm! well, back to the package inside the package was a smaller package! Dectane tailights black smoked they look so cool at night i plugged them in and got them fitted, but one problem. i have a loose wire? looks like it goes to the brakelight? perhaps? idk? any pointers?

Also.. Some parts are comming home shortly! Fun timez Sent from my iPhone using Tapatalk

Well.. Work has begun. So, as an update on The car: Ive started to take The front of The car too smooth The plastics. Allthough it takes some time since im working alot and most time its The graveyard shift, and The car is sitting in my parents's garasje. So, im in the middle of smoothing all plastics in the front, and some interior pieces. I then started to disassemble the front bumper, alittle hassel the first time, but i got the hang of it in the end. I would suggest to either (best option) have a mate or friend with you to take it of. Or just pop off both sides, then release the four nuts in the upper grill. yeah, all the wet gravel is washerfluid.. couldnt help it.. aaand i actually didnt care. its not that expensive :P and there it is, off the car i took off the lower grill and put the bumper back on the car with the new blinker in glossblack and here is just a couple of pics of the pieces waiting for the rest so it can go back on the car Im back soon! Best regards - Mortyy!! Sent from my iPhone using Tapatalk

so.. something has come up. a little bump in the road i guess i can call it. So there will not be happening much here on the car for some time. But! I will during the winter season (hoping for alot of work) i will be gathering different parts for the car and getting it ready during the winter. Parts im looking for: Bodywork: CarDNA tail-lights - any input there? 2015 Xenon convention - any input is much app! Cup Spoiler Lowering Cardiping the whole car in matte gray with black decals Fix licensplate LED's Interior: cupholder for backseat covered cupholder in front LED interior Colour codeing to piano black, - rest of interior pieces. Leather interior? black ofc Engine and exhaust: DPF delete, EGR delete. converting whole exhaust line to 2,5" / 3" ill update the list as i figure out what more i want do

Took a little roadtrip to sweden, Bergen - Strömstad = 1200km so, can say that ive enjoyed it [emoji4] Filled The car with cheap soda, candy, and grownmans juices! A couple of pics from The trip: AS you can see from The last pic, The trunk was full. Weighed The car out of sweden till 1740kg just 30kg under max! [emoji23] good trip! Sent from my iPhone using Tapatalk

time for a little update. i havent actually done so much with the car recently. but had the car on a dyno today. Was told that the figures and the graph was somewhat unusual. any pointers much appriciated other than that, i got a sponsorship with a automotive lights dealer here in Bergen. They enjoyed what i had done with the car and my plans for the future. Have plans for changing the interior, OEM 2015 xenon convertion, Cup-spoiler, changing the bumpers to R-version etc. It will happen over time, hence im between jobs atm.. so alittle slow progress now over the summer i guess :( but stay tuned! - Mortyy!!