aloevera797

Hello: news about the patient. I write from my mobil, this is a experiment sorry for any inconvenience.

Hey there After a long time, many pc problems, do not let me upload photos because I have access to the PC is dead. Since May, the car is in the process of sheet metal and paint. For oxDogg: The easiest way to place the damper is in the door without placing first un the top of the door, put the door un place, and finally the bottom hinge damper. I try to keep alive, and report progress. I need many pieces that i can not find. Un saludo desde España.

hello again: Little work dismantling the car, but I progressing. and buy some parts for reform If you can accept all kinds of tips about this and other questions that are pending A greeting.

Hello again: I haven't progress to report. I read in some forum user "A fun without its fiber parts, is not a fun" Someone has replaced parts fiber, to plastic body parts? I have to try some, golf wheel archs. They could serve? Someone knows this project? These parts can be airdesing signature? anyone has information about this company? I never want to spend the same work to remove parts of fiber, Seeking a solution, other than the glue ****. that's all folks ..... A greeting.

Thanks for all the help: respect to the hanger have this work jacket. on asking, is fine for the bikini, but I thought it would be for the bimini. For plugs I seek profits at the time of assembly. Far away right now. found coins and "blue pills" underneath the upholstery, I'm also finding fossils. the patient is well now. that's all folks ..... (for now) A greeting.

hello: I went through the same problem I do not know exactly what you do not get the screw pull out, my solution was to: I used to take out a screw used grinder machine. I hope you have more luck than me a greeting

Hello again: Thanks for your help, I try to make progress. good tools things work, half, all the screws out but one is left halfway bad thread, I tried prying but it does not, I left it as impossible ...... any ideas? I can not sleep, I continued without knowing how the filter housing works that's all folks ..... (for now) A greeting.

many possibilities with photoshop ...... The car is best. Any colour is good

hello again: I found several free plug, I wonder that I'm in the left one red and one brown, on the right side one brown. behind the front seats is a piece that did not know what it is. that's all folks ..... (for now) A greeting.

thanks for your welcome. of course, canary yellow, but not for long time. the project moves to dismantle and change the color to Canarian tropical cockatoo :sun: link to project http://www.briskoda.net/forums/topic/316804-striptease/ a very important picture that I forgot work while we eat well, very important to eat and drink well Greetings from warm earth

Hello: I write from Spain. This project begins disassembling the entire car. We start from the rear, Difficulty: The screws do not come out the rear bumper. I used to take out a screw used grinder machine. only one screwdriver and wrench 13 classify all parts removed and took a written record of disassembly attempt to disassemble the door hinge. Anyone have an idea how? No heating or cooling disassembled by them. I also tried hitting them. I think the best solution May be to weld a screw top. The fiber parts are either very difficult, missing the sides down (it seems very complicated) removed a portion of fiber with heat and spatula. removed the rear door on the latch there is a cap that is about to break I broke the bars and tapas plastic roof and a screw that did not come out the same. (oil, allen wrench, drill) also the plastic clips on the rear seat, plastic clips for doors and interior plastic tab something not understand how it works , air box hatch just hot air This system must have some kind of trick that I failed to understand Sure all the information is already in the forum, I repeat is quite difficult for me to understand many of the post translator I appreciate any help that you can provide me . I do not have much experience in forums ... I hope you understand and avoid mistakes a greeting

hello: apologize for any inconvenience my language is Spanish, it is difficult for me to understand many of the post and look for information to solve problems I encounter. after five years of search I finally I own a fun to enjoy the process will be long I hope the info you can provide will be useful to others. I would also like some help from this house . A greeting