SuperB-Nl

Diffeence was very little I dont have numbers at the moment but still I suggest that after any height diffrence I would go for wheel alignment. Sent from my iPhone using Tapatalk

but when i am riding and hit about 4k rpm i can hear actuator(i think is the same expresion as blowoff? ) and when the engine hit under 2k this sound appears. Do you think is still actuator? Sent from my iPhone using Tapatalk

So here is a video of strange sound. Any ideas? First two relaese are okey then not. :/ Thanks! https://vimeo.com/161945643 Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Some of the stuff used in this project were: -CarPro Reset -Gtechniq P1 nano polish paste (Better then Manzerna for me) -Some Manzerna polish paste -Gtechniq G6 for glass -Gtechniq W6 for wheels and body. For same purpose I used CarPro Iron X and results are the same -CarPro Eraser -Gtechniq EXO after polishing -And after EXO siol seal Gtechniq C1.5 -And some other goodies The EXO and C1.5 are really great!! After two days (one suny and one rainy) I was very impressed with shine and bending of the rain drops. Before I used R222 wax, CarPro Reload and some others but nothing can compare with this setup (from what I tried). Sent from my iPhone using Tapatalk

Pictures after EXO and C1.5 Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Here is only polished. I will upload it later with Gtechniq EXO and C1.5 coating. Sent from my iPhone using Tapatalk

So this weekend I will apply gtechniq EXO coating with C1.5. But before that here is one old picture of remap on aprx. 130hp and 220Nm. Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

here you go 18x8J ET35 - 5x100 215/35/18 In front, the wheels rubed at brake pades. So I did some grinding on pads and for that there is no rubbing. But i think that was because of the interior structure (not the wide) of those wheels. Sent from my iPhone using Tapatalk

New lid for armrest. Sent from my iPhone using Tapatalk

Thanks for that info. I will report when this would be all done, and how much did the alignment changed. Sent from my iPhone using Tapatalk

Thanks for anwser, I will check alignment after changing the height. I will check it one week later or somthing like that, when all things set down. Sent from my iPhone using Tapatalk