adakt

The adjustment of the the throttle body make it with texa diagnostic.Very easy in 1 minute also I hear the adjustment(the noise you said) now no errors in vag com.All runs perfect.

I change throttle body i found a second hand for 70euros now the car works perfect.Thanks friend for the help..

no the idle speed nice .But a few times revs to 2500 and down a strange sound from carchoal canister.And also in the idle the car turn off.A hoose from charcoal was loose and fixed.If charcoal has problem what the behavior of the car?

friend i have issues i open hood and the noise of the carcoal canister is strange not normal i notice also is connected to throttle body if has problem what symptoms gives the car?

friend now no problem with idle speed.But when channge gears at slow revs the car is shaking........is from throttle or something else.i cant go well with small revs.The throtlle adjustment done with texa diagnostic.

with motordiag software you can reset the value of ecu.After that you can make throttle adjusttment. www.motordiag.eu/msm/index.php otherwise you cant make adjust.i put this program and works.

in vag com i found dificult to make throttle adjustment.can anywhere can i find a guide anywhere about that?

I have done this before 1 week.I had error message.But after cleaning air pressure now its ok. After 500 kms why?The ecu refresh the values of throttle? That's why must use motordiag simos manager software it erases old values.I am thinking to buy VAG 5053 for skoda Felicia is good? Its standalone to use for finding errors for car?

i went a friend mechanic.I explain him what we have done i put that we test it .Now the car works perfect.The idle speed perfect.Very a few issues because ecu has the old valuesof the throttle.I think they willdisapeard.I will open that had problem to see what happend many people i think will interested.Really thanks i will wait you in Greece to celebrate in taverna(restareunt)

friend everrything ok 3,4 zero as you said what do next also 5,6 as you said uniform readings

i will take photos

i check also ms and i hear the beep sound so its ok

here the results of the measurements 20k pin 1,2 (1.01) 20k pin 6,7 (0.02 ) pin 3,4(2.32) pin 5,6(1) in 5,6 the value oone doesntt change at all what do you think?

can you show me in this picture the directions of the pins, where is the start and where is the end. Also could you tell me where exactly to set my polymeter to get accurate readings?(2000k,200k,20k,2000 or 200?)

I like to ask you also.I will put now the old throttle body that I fix.If live the car without connect the battery poles,The switch the key to on postion the throttle will calibrated? do I will have problem with the ecu of the lpg ? or not thatnks because I red somewhere in this forum to recalibrate the throttle body you can do the above procedure.