Marnhullman

No oil service warnings but I believe the method is the same? I follow the process and the display shows "Reset" but it isn't!

bigadel1 Tried that but no luck. I've read elsewhere that sometimes it's just not possible to do the reset the way you describe and a VCDS scanner is needed. Another member, local to me, has oddered to use his scanner to do the necessary and I'm just waiting to arrange a meeting. Very frustrating as it seems most folk are able to clear the message using the dash button. Regards

Thanks varaderohuy and paulski. I will take look to see if there's anyone near me who can do the necessary. Regards

I have tried resetting the 'inspection due' message by following the instructions posted here and elsewhere i.e. 1. Press the button 0.0/SET until dash lights up. 2. Keep holding button and turn on ignition (do not start car) 3. Keep holding button until "Reset inspection - are you sure?" is displayed. 4. Release button and press again to reset. 5. Dash displays "Service reset". But it isn't reset and the "inspection due" message is still displayed. I've tried turning on the hazard warning lights whilst performing the above, which was one suggestion but no luck. I have a DCAN/USB connector so I could install some software on my Windows laptop if I could find something suitable at a reasonable price or I would buy a scanner but the ones I've seen advertised only state they clear error codes but I want to clear the service due message and none of the ones I've seen make it clear that they can do this. Any help appreciated. Regards