ianbirch

I have now retrieved all the bits that fell into the heating vent... and consequently fixed the vent. I did this by taking the plastic end off my Henry hoover which then makes the flexible hose thin enough to fit right down the vent and suck the small parts out (and yes I did take the bag out first lol) Regards Ian

I know this is old but hope you can help... I've got the vent out but the little bits have dropped into the vent pipe how did you get the back of the console off.....or any other info to retrieve the bits. Thanks Ian

Thanks very much for all the replies...very helpful....couple of things I hadn't thought of. Regards Ian

Thanks for the reply but i wondered if this could be compensated for in VCDS... how does the manurfacter deal with all the different wheel sizes they offer? Regards Ian

Hi all, I wish to change my Pegasus 235/45/18 wheels to 205/55/16 on my 2016 Mk3 Superb Can I do this and still maintain correct speed and mileage readings. Regards Ian

Further to my last post I meant to say that without this guide I would not have known where to start or had the courage to do so... so thanks once again. Regards Ian

Thanks very much for this guide... I have just done my twin door with this exact problem. My wires... The only thing I've added is how I repaired the wiring. 1. Push a piece of electrical heat shrink over one part of the broken wire. 2. Strip the ends of the broken wire and twist together. 3.Then solder the wire together and cover the join with the heat shrink and heat up. 4. Then when all repaired wrap all together with electrical tape. Regards Ian