AaronD95

Do you still have the vrs alloys

You still have the spiders

It doesn't leave any soot on the back and the bora I raced said it didn't really smoke at all but that could be because it's had a recently new turbo before I bought the car. I know it's a garnett but don't know if it's a 130 or 150. It could be my boost gauge maxing out at 26psi as it's digital so I'll contact the manufacturer and find out

thanks. Sent from my iPhone using Tapatalk

I thought it was high for standard but I'm sure I read somewhere that 26was standard or could of been what most people run after remap. Thanks for confirming it. And way of getting it to boost a little bit more than 26psi as it produces 26 from 2000rpm onwards all the way to 4500rpm. Would a boost controller work or should I just go for a front mount so it's less restrictive than the side mount Sent from my iPhone using Tapatalk

What diameter was your old system. And was it a full straight through. Decat and de-back box Sent from my iPhone using Tapatalk

I plumbed my boost gauge in today and it peaks at 26psi and holds there but I'm sure I've heard 26psi is standard pressure and my car is definitely remapped. But it produces 26psi from 2000rpm onwards. I can pull away from a 180bhp pd130 bora easy. And my mate I bought the car off says it's mapped to about 180-190 and there's a receipt for it. Could it be the actual on the turbo holding it at that and could I fit a boost controller? What sort of bhp and pressure are people running on here? Psi or bar. Thanks in advance. Sent from my iPhone using Tapatalk

are you running a standard map?Sent from my iPhone using Tapatalk

Thanks Sent from my iPhone using Tapatalk

Can anyone tell me if there's a grommet on the drivers side going through the firewall so I can run a vacuum pipe or a boost gauge. I know there's one on the passanger side but that has 0gauge amp wire going through it do it might pinch the vacuum pipe if I run them both through that side. Thanks. Sent from my iPhone using Tapatalk

that ones in use for my 0gauge amp wire and I thought it might pinch the vacuum pipe so I was hoping for one on the drivers side. Thanks anyway. Sent from my iPhone using Tapatalk

Do you happen to have a pic of where your vacuum hose for your boost gauge goes through the fire wall. Sent from my iPhone using Tapatalk

are they 17" or 18's

1. SKFab - PD130 - ASZ with boost nipple 2. MarkPIX - PD130 - ASZ with boost nipple 3.Fabianski47vrs -PD130 - ASZ with NO boost nipple [/font][/color] 4. KesselaarD - PD130 - BLT with No boost nipple 5.notts-vrs - PD130 - ASZ with NO boost nipple 6.Redlinemike - pd130- asz- no nipple 7. Barbourc1 - PD130 - ASZ - No boost nipple 8.AaronD95 - PD130 - ASZ - with boost nipple

thanks I'll try that

Where abouts in Flintshire are you. I'm only in caergwrle.

I got a quote on Facebook and they said to ring up to book a date for it and it will be up to 2hours from start to finish. I'm in caergwrle inbetween mold and wrexham

ive had a quote from powerflow up in Deeside for the back box delete all fitted with handers made up and a tip of my choice welded on for £40, Recon its a good price?

Anyone know if it's possible to wire the fogs to the high beam. I did it on my 306 using this guide http://www.306oc.co.uk/forum/showthread.php?tid=143 or am I best doing it like this if it's possible

Thanks dan. Has yours been done? Or do you still have the original back box

Hi im thinking of replacing the back box with a length of 2.5" exhaust piping I have and joining them up with something like this http://www.ebay.co.uk/itm/2-5-inch-Stainless-Steel-Clamp-on-Exhaust-pipe-joiner-connector-sleeve-tube-/251388626060?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a87ee048c but had a look under the car today and it looks like all 1 piece from the clamp just after the cat. Is there a way of getting it all off or do you have to cut it off?

That would be great thanks. Could you pm me a price and PayPal or something. Sent from my iPhone using Tapatalk

Thanks

Have you got a link for the brass nipple you plumb into the plastic pipe? thanks

Standard, if your wondering about shortened drop links I will be lowering it eventually but for now I don't mind spending £11 on these if they stop the knocking noise until I go lower and then look at shortened ones