-
Car Battery coding tool
I changed mine about 3 years ago. Like for like AGM to AGM never had it coded and have never had a problem. Yes the start stop doesn't work for a while after changing and the normal ABS and ESP lights but they go away after driving for 10 mins.
-
Glow plug replacement
Yes number 3 plug is the pressure sensor, the others are normal glow plugs.
-
Glow plug replacement
Ty for the replies. I will put more oil round it and give it a few more days. I am using Bosch plugs so might go 2nm over the 17nm tightening spec next time I try. Will let you know either way.
-
Glow plug replacement
Yes I have, followed all the procedures to the letter. Just wondering if there is any may torque to undue the old plugs?
-
Glow plug replacement
So I now need to replace the other 2 Glow plugs (should have done them all in one go) So the Torque setting for tightening is 17nm for normal plugs but I have one which is well stuck even after lubricating for a few days. I was wondering what the torque spec is for removal, I have gone as far as 16nm but was a bit reluctant to go any higher. Anyone know?
-
DIY Advice: Boost Pressure Sensor
I also have this problem and the same code just come up this week. I have the 1.6 Diesel engine and was wondering if the sensor is the same part number and is in the same position as the photo above?
-
Glow plug replacement
Your torque specs are correct.
-
Washers not working
So this is definitely the solution. I thought it would have been a fuse with both front and rear not working, or making a sound?
-
Glow plug replacement
I need to replace number 2 glow plug but I can't even get a socket in the space 1.6TDI 2013. Any advice, it looks like I need to remove a lot of metal tubing before I can get a socket onto the plug?
-
Washers not working
So one pump controls the front and rear washers? any idea of the location?
-
Washers not working
Can anyone confirm which fuse to check as most people said fuse 42 is not the one. My car developed the same issue yesterday.
-
Engine shut down - cranks but no start
Could be, you should hear the Fuel pump whine a bit when you turn the ignition key before cranking though. Could be the plugs, although I would have thought that you would have a code for that issue.
-
2015, 1.6 diesel glow plugs - how to change.
Does anyone have the part numbers for the OEM plugs, need to change all 4 of mine as well.
Daheee
Finding my way
-
Joined
-
Last visited