dan_irinel

Hello, Recently I noticed that when I press the clutch, close to the end of the race, it feels like something is blocking the pedal or the cable inside. Anyone experienced this? Is it possible that the cable is jammed inside? Do I have to change the clutch cable?

My BCM is: Part No SW: 1K0 937 087 P HW: 1K0 937 087 P Component: BCM PQ35 H+ 104 0615 I have ODIS-e, can I upgrade sw? I bought BCM online, how can I see if lighting config is RHD or LHD and how can I change it?

For a BCM does it matter if car is RHD or LHD?

You no longer have 1K0 937 087 R module?

Under the module code there are specs about what I suppose are SW and HW versions: S0651/H110, so I'm guessing SW version 651 and HW version 110. Does anyone know if HW versions imply changes in pinout? For instance I have H104, if I change BCM with one with H110 will pinout match?

If you don't want to change your windscreen, here is a link on how to do it. Is for VW, but gives you lots of info and details: https://www.myturbodiesel.com/wiki/rain-light-sensor-retrofit-and-installation-vw-diy/

Ha ha, the hell we go through for our cars...

If you have ODIS-e you could do what I did. You can edit EEPROM controller one byte at a time with a correct code. Takes a lot of time and it is kinda risky too, one wrong byte and you can destroy the controller, or worse, maybe something else on your car. Not something I encouraged you to do but it worked for me.

What do you mean "sec block"?

This guy says indirect TPMS will work only for 843Q or higher (sw 06xx). If indirect tpms not working I assume direct tpms will not work either... hmmmm https://www.drive2.ru/l/10090737/

Thing with controllers from other cars is that it might not work correctly on auto lifting/lowering the window. Although they have same code on controller they have different code written on EEPROM. I have experienced this issue when retrofited folding mirrors on my car. I had two door controllers from a Golf but did not work auto window. I had to write EEPROM with code from Octavia.

I have retrofited dimming mirrors on my car. Actually there are two wires that run from mirror, through the door controller (just passing through the controller), door loom and to the rear view mirror. None of the wires is grounded (maybe inside rear view mirror?)

Hello, Does anyone know if cluster SW 04xx will display TPMS corectly? Does anyone has TPMS with cluster SW 04xx?? This is mine: Address 17: Instruments (J285) Labels: 5K0-920-xxx-17.clb Part No SW: 1Z0 920 843 K HW: 1Z0 920 843 K Component: KOMBI H20 0420 Serial number: 00000000000000 Coding: 110A01 Shop #: WSC 73430 031 00125 ASAM Dataset: EV_Kombi_UDS_VDD_RM09 A04089 ROD: EV_Kombi_UDS_VDD_RM09_SK35.rod VCID: 4097572B8A833A825FE0165-8014 Thanks, Irinel

Incearca pe forumuri romanesti: https://forum.softpedia.com/topic/954127-decodare-casetofoane-auto-3/

Update: New quadruplex antenna. After updating to Columbus nav system I install some AM antennas, but had errors with VCDS. So I decided to upgrade antenna too. A bit tricky to run the wiring, but totaly worth it.