Hello,
There might be possible to do it if option are available. Go and check door controller coding. Probably you have to change it on both door's
[42 - Door Elect. Driver]
[Coding - 07] -> [Long Coding Helper] -> [Byte 4]
[Bit 6 - Undocumented (1 = active) in Binary String]
=> Change Bit 6 to 1
Note : Bit 0 is at the far right of the binary string
The HEX value for this byte was probably 1C; Binary Value [00011100]
and the NEW HEX value should be 5C; Binary Value [01011100]
Esc or Exit
Transfer Coding
Do It!
[52 - Door Elect. Pass.]
[Coding - 07] -> [Long Coding Helper] -> [Byte 4]
[Bit 6 - Undocumented (1 = active) in Binary String]
=> Change Bit 6 to 1
Note : Bit 0 is at the far right of the binary string
The HEX value for this byte was probably 1E; Binary Value [00011110]
and the NEW HEX value should be 5E; Binary Value [01011110]
Regards,
Dikata