Hoping someone can give me some pointers before i take the car to a garage and get ripped off.
Bought a 2014 Monte Carlo 1.2 TSI last August to use as a run about when in Suffolk, just before i bought it the owner had the Knock sensor replaced. While driving the other day it suddenly wouldn't accelerate or pull up slight inclines. I carried out a scan and found the following.
-------------------------------------------------------------------------------
Address 01: Engine (J623-CBZB) Labels:. 03F-906-070-CBZ.clb
Part No SW: 03F 906 070 HK HW: 03F 907 309 AK
Component: SIMOS10.22AH10 5471
Revision: --H10--- Serial number: CVN: 63195D3B
Coding: 00110056200400080000
Shop #: WSC 13765 031 00051
ASAM Dataset: EV_ECM12TFS02103F906070HK 004006
ROD: EV_ECM12TFS021_SK25.rod
VCID: 72EBF68DA5AB5E1947-8026
VINID: 91D49678215A1950C10C210124DD64F8DF
2 Faults Found:
9541 - Knock Sensor 1 (G61)
P0327 00 [104] - Signal too Low
Intermittent - Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 5
Mileage: 143004 km
Date: 2022.02.25
Time: 20:33:54
Engine RPM: 3117.00 /min
Normed load value: 95.3 %
Vehicle speed: 73 km/h
Coolant temperature: 93 °C
Intake air temperature: 33 °C
Ambient air pressure: 1010 mbar
Voltage terminal 30: 13.789 V
Unlearning counter according OBD: 40
Time since engine start: 445.8 s
Engine torque: 145.78125 Nm
Accelerator pedal travel-Accelerator position: 44.82 %
Ignition angle of current cylinder: actual value-Ignition angle: actual: 13.875 °
20045 - Fuel Quality
P30C0 00 [047] - Inadequate
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 143266 km
Date: 2022.03.02
Time: 14:50:42
Engine RPM: 2196.00 /min
Normed load value: 66.3 %
Vehicle speed: 71 km/h
Coolant temperature: 95 °C
Intake air temperature: 34 °C
Ambient air pressure: 1010 mbar
Voltage terminal 30: 14.218 V
Unlearning counter according OBD: 40
Engine speed: actual: 2176 /min
Engine load: 66.015625 %
Time since engine start: 204.1 s
Knock sensor: cylinder 1: voltage-Knock control: knock sensor voltage: cyl. 1: 0.23720 V
Thanks