mushroomnr

Had the same problem, skoda replaced charger flap switch/mechanism free of charge under extended warranty

Wonder why? I never had got any problems with that car, so just looking for advice on what is worth checking or 'done' .

Hi All, Decide to keep my superb - 160k mileage. The car would go for big service tomorrow in the local trusted garage. Cambelt and water pump were replaced at 76k - and four years ago. I think it should be replaced now again - that was booked. Oil,coolant and all other filters. Wonder if there is something which should be done. DSG was serviced at 140k. I was thinking about the air inlet and maybe egr required some cleaning etc ? Any suggestions are welcome as I had the car since 2018 and really would like to keep it for another few years as I don't have any problems with it. Thanks.

So ignore my previous messages I have found solution with all up to date files instructions as well. Have a look below https://www.drive2.com/l/465526077448520463/ If someone struggling with Russian google would translate for you.

Anybody know where I can find 6270 or 6276 firmware ?

I have got the same problem, stuck in the loop with SWL initialisation in progress....wondering what I can do with that ? Is it time for new unit or something can be done ? I managed to get two swl disk and when force to rebut with 3 buttons it shows updating but after finish still the same problem. I have two SWL drives with software as below #CD:P 0 0 4 . 9 0 0 . 2 0 1 #DATE:2010-03-01 #Project: VWRNS #Author: RoNe #Steckbrief: C_NAR_9.442_t925 C3/C4C/C6 #CommentStart: This is a SWL CD for VW delivery. and second #CD:P 0 0 5 . 3 3 4 . 3 0 1 #DATE:2011-06-09 #Project: VWRNS #Author: RoNe #Steckbrief: C_EU_10.344_t191 C3/C4A/C5C/C6/C10 #CommentStart: This is an unofficial SWL Recovery CD by josi. Use it at your own risk. Wondering if someone can help with that ? Superb 2014.

Hello all, Can someone confirm that it will fit my superb ? I can extend cables, that is not a problem, just would like to confirm that this unit will fit and work as it should ?

Is it something like that ? https://www.ebay.co.uk/itm/NEW-GENUINE-VW-POLO-6R-13-PIN-TOWBAR-TOWING-ELECTRICS-WIRING-KIT-ECU/283028496851?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D225114%26meid%3D4e2c11791a914f17a494da1df0ea7896%26pid%3D100675%26rk%3D1%26rkt%3D15%26mehot%3Dag%26sd%3D283028496851%26itm%3D283028496851%26pmt%3D0%26noa%3D1%26pg%3D2380057%26brand%3DVW&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3A513bbd8b-3092-11eb-b5bd-2a35f04cbef1|parentrq%3A0904724e1760acc737a64181fff85a18|iid%3A1

I don't mind to extend cable, but I think I will stick to dedicated one which I have found on german website, I just need to confirm that this will fit UK version.

good point....I need to check this

I have found dedicated unit with connection to can bus. https://www.rameder.eu/westfalia-towbar-complete-set-134732-07588-1.html It's still required VCDS integration but that shouldn't be a problem.

Will that octavia kit will be good for my car ? https://www.ebay.co.uk/itm/Skoda-Octavia-13-Pin-Tow-Bar-Wiring-Kit-5E0055316A-Genuine-New-Skoda-Parts/174520062456?epid=22018961217&hash=item28a234d1f8:g:wJYAAOSwNkRfnGgP

It comes back with below: 1D0 = Without trailer hitch so I understand that I can go with basic wiring kit ? Or should I get dedicated one and them reprogram it ?

Ok, I will order that one. What cable or software is required ? something which I can get easy from ebay ? I have got basic BT dongle and some android app but I recon that it need something more advance ?

Thanks for that. Will that kit required any software coding or just plug and play (and cut few wires etc ) ?