QubiDK

It will work. I had the same small screen in my Superb III. Bought the big screen, had to chip off a small plastic piece of the plug and after that, was plug and play.

It is a plug and play process, could be though difference on the plug that goes in to the screen. You can just cut of the "excess".

Hi Everyone. I had this error this morning...4984 - Cylinder 1 Glow Plug Circuit (Q10) P0671 00 [237] - Electrical Fault I read, somewhere here in the forum, that one of the plugs have a different size... I just looked up Bosch (as I heard they are the factory installed ones) an even the full set has the same sizes... Is this a wrong info, if not any, OEN part number for the "one"? thanks in advance.

That is not that bad...how big wheels you have on the car?

I read your post too;) but I still don't get it;) Plus I have an estate, so I wouldn't compare to yours either... On autodoc there are 3 sets from eibach. On the eibach homepage, all of them said 30mm lowering... what's the difference between them;)

Hi guys I want to change shock absorbers and springs on mine. I passed 6 years of age and 280.xxxkm and still have the originals on as I know (I got the car when it was 3 years old). I will install Koni Actives. I asked some others if the original springs needed to be changed or not? (No damages or corrosion) but I guess I will anyway... I checked autodoc, eibach homepage and tried to search but as I can see almost all the pro kits will lower the car, I would like to avoid that... Anyone who is already went through the process and could helpe out to chose the right ones? No DCC in mine... Thanks in advance

I can see on your profile you have the same as mine;) All right, the shock absorbers part is clear then. do you know about the spring part? Is it necessary to change them, and if yes, I would like to avoid to lower the car. I read also this topic: https://www.briskoda.net/forums/topic/485647-bilstein-b6-dcc-shock-absorbers-available-at-last/page/2/ but I did not get smarter.... On autodoc there are 4 sets the last one is the H&R, if I want to buy separate there are more to choose from, but I am clueless...

Hi Markbro I just did, but I couldn't find answer for the matching part nr. of 8745-1325. Looks the same by the way, and there is price difference, though not that significant.

Hi guys. My car just passed the 6 years old, with 280.xxx km on original shocks and springs. Want to change to koni shocks. How often the springs needed to be changed? Any recommendations if needed... Do not want to lower the car;) I read that I need 8245-1387 for the rears and 8745-1388 for the front, but autodoc sais the front is not compatible with mine, and instead I should buy 8745-1325. Anybody can assist in this matter? Cheers

Hey everyone Does somebody knows, what is the OEM number for the mudguard / flap / spoiler, that is on the front bumper, on the bottom of the wheel arch liner. The first thing you need to remove, when you taking the bumper off. 2 screw holding it, and 2 plastic bump sticking out of it, that goes on to the liner. Mine is broken and need to replace it. I cannot find it on ETKA neither...

You are/were a magician... I did take the bumper off and took almost 4 hours the whole procedure. I only did change the grill frame.... So I recommend, do not try without removing the bumper... some of the clips, and screws impossible to reach without that, if the bumper on its place...

The only problem with Carlinkit 2.0 that only works with iPhone, if you have that, it works flawlessly;) Android not supported.

@SashaGrace what does the extra airflow do? (Any advantage?)

Hi. You need this camera (5Q0980568B) for trailer assist function, plus pla 3.0 and sensors all the way around. (if your car have parking assist probably you are good to go.) I also made the mistake and ordered a high camera instead of this one. (The price was 20-40 eur difference only;( ) but I didn't know that time...

Did you make a photo of the washer pipe junction?;)

Compare to the first car you planned to buy, this one is waaaaay better...you didn't write specs...same engine like the previous one?

I forgot to mention that of course... the ACC is on and yeah I have that also...as I read the forums these are the thinga is necessary for TJA...

A question: if I have lane assist and Adaptive lane guidance, why the TJA not working;) if i take away my hands from the wheels I have to press on the throttle... Or am I missing something?

Hi Where can I connect the pipeline and the y connector? I retrofitted a camera with washer, but i couldn't find the waterpipe... I do have rear wiper (the water comes from the 3rd break light) Thanks in advance...

I guess you changed also the whole mib system and upgraded to 2.5... how much difference between the wiring and wiring harnesses? Have to be replaced everything by the upgrade or enough the main unit and the additional screen (with the wires for the screen)?

That means that you have only one view? or there is another option to change that... I saw also that the factory fitted ones, have a view button on the driving wheel, meanwhile on the other ones a phone icon. I think to get the MIB 2.5 system too much hassle, and not that big of an update compared to the MIB 2, at least that is my opinion. So if only the maps cannot be displayed on the VC, but the directions are there....fine by me.

Sound interesting. I wouldn't mind either the map part, if the navi info still comes up as on the dot display. Which VC setting do you mean?

Hi. How did it go the installation? Does it need the mib 2.5 unit? Or it works with the mib 2 too? Any update?:)

Any update on this topic?

Would be great in my Superb too. I tried a rented Passat from 2019 with this option and it was great. So if someone comes up with a solution, I will give a try.