gnuttisch

Hi, These weekend I got the same errors as before, on my left headlight. So their was no success with changing the modules. I remember that I got the same faults once before in the middle of the summer. It feels that their is something in the headlight that isn't alright. Regards

No update, the fault disappeared right before I where going to swap the modules, but I swapped them anyway and put everything back together. So now I just have to wait to see if the fault will come back and if it's following the module.

Okay, I will look in to it. Thanks for your excelent help!

So I got my buildcodes from ebay, and found these that seems intresting. 0YF Weight range 6 installation control only, no requirement forecast 1JC Shock absorption in rear, sports version Is it 10% harder springers per row ?

Where can i find the OEM, dont think it still labeld on the springs? Yes, it got towbar from factory. But the car is from 2018 and runned about 5200 miles, dont think that is sagging already ? And the car is an sportline, so should already been lowered with 15mm? but dont have any DCC. When Iam towing or heavely loaded, the car feel swamping and low in the rear.

Wonderful thread 👍 Iam about to order these 3Q0511115AB for make my sportline combi stiffer in the rear when towing. And if I have understand everything right is shuld be the same ride height but higher load without sacking / boaty?

Hi, I have an superb 2.0TDI 4x4 sportline estate and feel that it's a bit soft in the rear suspension when loading and towing an caravan. Does anyone know if their is an stiffer spring that I can change to without sacrifice the look of hight onloaded ? Regards

Their is some guides on Youtube but I guess it takes about 20min or so, I only removed it about 15cm so I could get the light out. The cables to the PDC and the rest was still connected

So today when when I where going to lose the bumper the lights worked and their was no new fault codes after deleting 🤣 But I removed the bumper and switched to modules anyway to see if the problem comes back on the same side or not. I will post back if it does.

I have the wiring diagram for the headlight if you want? Yeah, you have to dismount the bumper

So it is the afs module that are controlling the motor that is mounted inside the headlight? Is it possible to switch left and right to see if problem follow? The motor inside the headlight is not completely dead, it make some movement but gives up after some seconds and tells check headlight and afs. I have the wiring diagram for the headlight, but haven't had the time to measure it yet. I have been seeing other posts that their might be an wire problem.

Hi, I have had the same issue from time to time with the left headlight. But now the issue have been fore some days and hasn't gone away. Also have the C1098 fault code when I checked with vcds. Anyone who got an clue on what the problem might be? Or is the only solution to buy an new headlight? Regards