MrZakalwe

Looms! Great idea, why hadn't I thought of that 😁

Hi jenson10, I have exactly the same problem, I don't suppose you found the answer? I would be very grateful 👍

Stuck in superposition 🙀

https://youtu.be/uaPARlPNXsQ

Yeah I'm definitely feeling the Berlin grief, "luckily" I paid for safe send as I need to send back a few bits that are either damaged or something completely different from what i ordered and that's a two way five week mistake 😬

Doses this work? https://1drv.ms/f/s!AjReSWszll-shIZdPm7Wl5jVqTQG9w

I can't express enough my confusion, shock and then horror when opening my box of bolt's from Febi Bilstein. I got a whole bunch of parts from AutoDoc some of which were 4x Brake Calliper Bolt's, 3x bolt's where exactly as expected, one of the bolts however looked very different! At first I thought it had a built in anti-roll washer, I figured as I ordered 4x perhaps one is supposed to be different and that AutoDoc recognised my mistake and sent me the correct part? Bit odd but ok.. On closer inspection I realised this was definitely not an anti-roll feature, instead it's the most misshapen warped piece of **** I have ever seen!! So many questions; - How did this get past quality control? - The bolts are MOLDED! Even the thread 😨 - Should I replace them all? - It looks like the Suspension Strut bolt's are also molded Should I replace them aswell? (I have just finished putting the driver side back together 😒) - What do I do with the bolt; complain to AutoDoc? Febi? Or do I stick it on eBay for £5k like this defected Haribo https://www.ebay.co.uk/itm/234411938197?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=8YhtHU9xTB2&sssrc=2349624&ssuid=t-SeITW2T_6&var=&widget_ver=artemis&media=COPY 🤣🤣 Just look at this! Grrrrr image size limits, briskoda needs to auto resize! This will take a moment to get the images up 😒

Bit of trivia for you, vRS is Victory Rally Sport, the "victory" was due to Ford trying to claim the rights to RS they lost the court case so Skoda could continue to use the RS badge, in response the UK got given the vRS, Basically I'm flipping the bird to Ford as I drive around the UK in my "V"RS....... V u Ford ✌️

And I wonder the difference between my PD and your CR... Fancy a rally ?!!

I bought one on eBay Skoda Bolero Radio Code Stereo Codes Symphony Unlock | Fast Service All Models | eBay Turned up 2x days after paying on PayPal, worked fine

Speaking of which, I was just thinking I need a tire pressure gauge .. Spooky 👻

Great advice, thank you, I shall fit it dry, good heads up on the leaking, I shall probably go with the tire as I don't have a good garden spryer, nice hack though 🖕

Aaha, I think, so with number 4 on the shopping list Working pressure: 2 bar / 30 psi So if this is the relative measurement the absolute will be 1bar / 15psi and could be useful I have to admit it was the one I thought would be the best, I didn't like the price, but, if it did the job well I have 4 corners to do one at a time so it will get some usage.

Thanks, the instructions do say between 10 - 15, so I shall keep what you say in mind, and as you say these kits have been around so there is a good amount of vids and guides so reasonably confident

Thanks Ken, that's why I didn't get it straight away as I also noted he was not impressed, however, he did manage it, twice, I only assume using this device. Unfortunately I can't quite work out how or what his problem was resolved. "so on the off chance there was air stuck in the master cylinder i bled that to and on the nipple closest to the bulk head low and behold air then fluid. the only explation i can work out for this is the air has traveled up through the system cos the resevior was never empty. but all sorted now" I don't know the difference between PSI measurements either, quick Google tells me that relative is to sea level absolute is not, I could probably find a converter with more searching.. I work at Halfords Retail, not the garage, changing the odd bulb or blade is my limit, mostly I scann itams and do what the computer tells me 🙄 - so the kit was cheep and the only one in the shop that might be suitable... Can I do any harm trying?